519281
20
Zoom out
Zoom in
Previous page
1/89
Next page
2. Place the log on the log splitter table.
L Only split the logs in the direction of the wood fibres.
19
3. Hold the log tight with the clamping claws.
4. Press both operating handles down simultaneously:
Î The splitting blade falls down and splits the log.
5. Release the two control handles, the splitting blade
returns to its initial position.
L If you only release one control handle, then the
splitting blade remains where it is.
Special instructions for splitting logs:
Preparations:
The logs to be split should be cut to the maximum
dimensions. Ensure also that the logs are cut straight and
square.
Place the log properly on the log splitter, so as not to cause
any risk of stumbling or falling to the operator.
Adjusting the stroke height
In case of shorter wood pieces the efficiency can be
increased by shortening the return of the splitting cutter.
1. Place the log on
the splitting table
and press the two
control handles to
bring the splitting
blade down to
approx. 2 cm
above the log.
2. Release one
control handle so
that the blade stays
in this position.
3. Switch the machine
off and disconnect
the power.
8
10
4. Release the second control handle.
5. Shorten the return path at the rod fitted to the side by
fixing the holding screw at the necessary height.
Holding screw
11
Adjusting the table height
Upper table plate
position for logs up to
590 mm
Middle table plate
position for logs up to
780 mm
Lower table plate
position for logs up to
1040 mm
9
12
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ASP 6-1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ASP 6-1050 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info