519281

Atika ASP 6-1050 Manual

21
Zoom out
Zoom in
Previous page
1/89
Next page
1. Release the locking hooks.
20
2. Pull the table out.
3. Use the table in a
position that comes
close to the log
length and secure it
with the locking
hooks.
Adjusting the splitting cross:
1. Loosen fixing screw.
2. Move the splitting cross to the required position.
3. Mount fixing screw.
Splitting short wood:
1. Upper position of table plate.
2. Place the log on the splitter’s table plate.
L Only split the logs in the direction of the wood fibres.
3. Hold the log tight with the clamping claws.
Splitting long wood:
1. Middle or low position of
table or base.
2. Remove the splitting cross.
3. Place the log on the
splitter’s table or base.
16
13
14
L
Possible malfunction
when cleaving logs:
The
log to be cleaved is not
cleaved right through, jams
on the cleaving blade and
is pulled up during the
blade’s return movement. It
is no longer possible to
release the log manually.
In this case, proceed as
follows:
1. Switch off the device.
2. Depending on the log
still to be cleaved fix the table plate in the upper position
or swing aside the table.
17
3. Switch on the device and continue the splitting operation.
¾ Never try to split two logs at once.
¾ Never try to remove or replace the log during the splitting
process.
L Never try to force the splitting of the log by maintaining
the pressure for several seconds. This can lead to damage
to the machine.
15
Fixing screw
Position the log on the table again and repeat the splitting
phase, or put the log on one side.
How to release a jammed log?
There is a risk of knotted logs getting stuck during the
splitting process.
1. Switch machine off and disconnect the power.
2. Carefully move the stuck log backwards and forwards to
loosen it.
Splitting cross
Never hammer on the stuck log.
Never use a saw to cut the stuck log out of the
machine.
Do not enlist the aid of a second person - this is a one-
man job.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika ASP 6-1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika ASP 6-1050 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info