Manual ATAG VA4611AT (page 22 of 60) (English, German, Dutch, French)

556996

Zoom out

Zoom in

1/60

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Elec-

tronic

23 - 28 40 - 50 4.0 - 5.0 28 - 35

19 - 22 33 - 39 3.3 - 3.9 23 - 27

15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2

< 4 < 7 < 0.7 < 5

1) Factory position.

2) Do not use salt at this level.

You must adjust the water softener

manually and electronically.

Manual adjustment

Turn the water hardness dial to the position

1 or 2.

Electronic adjustment

1. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode, refer to ‘SETTING

AND STARTING A PROGRAMME’.

2. Press and hold buttons (4) and (5) at the

same time until the indicators of buttons

(3), (4) and (5) flash.

3. Press button (3).

• The indicators of buttons (4) and (5)

go off.

• The indicator of button (3) continues

to flash.

• The acoustic signals operate, e.g. five

intermittent acoustic signals = level 5.

• The display shows the setting of the

water softener, e.g.

= level 5.

4. Press button (3) again and again to

change the setting.

5. Deactivate the appliance to confirm the

setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA4611AT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG VA4611AT Manual

Product: