Manual ATAG VA4611AT (page 21 of 60) (English, German, Dutch, French)

556996

Zoom out

Zoom in

1/60

flashes quickly 3 times and then goes

off.

Multitab

Activate this option only when you use the

combi detergent tablets.

This option deactivates the flow of rinse aid

and salt. The related indicators are off.

The programme duration can increase.

• Press the multitab button, the related in-

dicator comes on.

If you stop to use the combi detergent

tablets, before you start to use

separately detergent, rinse aid and

dishwasher salt, do these steps:

1. Set the water softener to the highest

level.

2. Make sure that the salt container and

the rinse aid dispenser are full.

3. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

4. Adjust the water softener to the water

hardness in your area.

5. Adjust the released quantity of rinse aid.

Acoustic signals

The acoustic signals operate in these con-

ditions:

• The programme is completed.

• The level of the water softener is adjusted

electronically.

• The appliance has a malfunction.

Factory setting: on. You can deactivate

the acoustic signals.

Deactivating the acoustic signals

1. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode. Refer to ‘SETTING

AND STARTING A PROGRAMME’.

2. Press and hold buttons (4) and (5) at the

same time until the indicators of buttons

(3), (4) and (5) flash.

3. Press button (5),

• The indicators of buttons (3) and (4)

go off.

• The indicator of button (5) continues

to flash.

• The display shows the setting of the

acoustic signals.

Off

4. Press button (5) to change the setting.

5. Deactivate the appliance to confirm.

BEFORE FIRST USE

1. Make sure that the set level of the water

softener agrees with the water hardness

in your area. If not, adjust the water

softener. Contact your local water au-

thority to know the water hardness in

your area.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the ap-

pliance. Start a programme to remove

them. Do not use detergent and do not

load the baskets.

Adjusting the water softener

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Elec-

tronic

51 - 70 91 - 125 9.1 - 12.5 64 - 88

43 - 50 76 - 90 7.6 - 9.0 53 - 63

37 - 42 65 - 75 6.5 - 7.5 46 - 52

29 - 36 51 - 64 5.1 - 6.4 36 - 45

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA4611AT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG VA4611AT Manual

Product: