Manual ATAG VA4611AT (page 24 of 60) (English, German, Dutch, French)

556996

Zoom out

Zoom in

1/60

Using the detergent

1. Press the release button (B) to open

the lid (C).

2. Put the detergent in the compartment

(A) .

If the programme has a prewash

phase, put a small quantity of deter-

gent on the inner part of the appliance

door.

If you use detergent tablets, put the

tablet in the compartment (A).

Close the lid. Make sure that the re-

lease button locks into position.

Setting and starting a

programme

Setting mode

For some settings it is necessary that the

appliance is in setting mode.

Press the on/off button to activate the ap-

pliance. The appliance is in setting mode

when the display shows 2 horizontal status

bars. If the control panel does not show this

condition, press RESET.

Starting a programme without delay

start

1. Open the water tap.

2. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode.

3. Set a programme. if you want you can

set the applicable options

• The programme number flashes in the

display.

4. Close the appliance door. The pro-

gramme starts. The programme dura-

tion starts to decrease with steps of 1

minute.

Starting a programme with delay

start

1. Set the programme.

2. Press the delay start button again and

again until the display shows the delay

time you want to set (from 1 to 24

hours).

• The delay time flashes in the display

and the delay indicator comes on.

3. Close the appliance door. The count-

down starts.

• When the countdown is completed,

the programme starts.

Opening the door while the

appliance operates

If you open the door, the appliance stops.

When you close the door, the appliance

continues from the point of interruption.

Cancelling the delay start while the

countdown operates

When you cancel the delay start, also the

programme is cancelled.

1. Press RESET. The display shows 2 hor-

izontal status bars.

2. Set the programme again.

Cancelling the programme

1. Press RESET. The display shows 2 hor-

izontal status bars.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

At the end of the programme

The display shows 0 and the end indicator

comes on.

1. Press the on/off button to deactivate the

appliance.

2. Close the water tap.

If you do not press the on/off button,

the AUTO OFF function automatically

deactivates the appliance a few mi-

nutes after the end of the programme.

This helps to decrease the energy con-

sumption,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG VA4611AT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG VA4611AT Manual

Product: