76319

ATAG KD 8122 BF Manual

21
Zoom out
Zoom in
Previous page
1/35
Next page
21
GB
* Depending on model and options
Setting the temperature
The appliance is pre-set for normal operation. We recommend
temperatures of +5°C in the refrigerator.
This will ensure an average frozen food temperature of approx.
-18°C in the
freezer compartment*.
In the refrigerator:
W To reduce the temperature:
Press the DOWN button 2.
W To increase the temperature:
Press the UP button 2.
- While you are entering the temperature, the
set temperature
will flash
on the display.
- When you press the temperature setting buttons for the first
time, the
most recent setting (known as the "reference
setting
") is displayed.
- You can change the settings in increments of 1°C by briefly
pressing the buttons again. If the buttons are held down the
temperature setting will change faster.
- The system switches over automatically about 5 seconds after
the button was last pressed and displays the
average cooling
temperature (known as the
"actual setting").
- You can change the temperatures in the refrigerator between
9°C and 4°C.
W The temperature in the Climat-Freshbox compartment is
controlled
automatically, between 0°C and 3°C.
If you require a higher or lower temperature, e.g. for storing fish,
you can
alter the temperature setting in the Bio-Fresh compart-
ment. See "Additional functions" for more information.
Temperature display
The average temperature in the refrigerator compartment
is displayed in normal mode.
If "
F0" to "F5" appears in the display, the appliance has a fault.
Consult the customer service department indicating the fault
number displayed, so that they can arrange for your appliance to
be serviced accurately and quickly.
Audible warning signal
The audible warning signal helps you to protect the food in your
refrigerator and save energy.
- It will sound when the
door has been open for longer than
about 1 minute
.
W The signal will stop when you press the audible warning
on/off button
5
- and when you close the door.
- The sound switch-off function is active as long as the door is
left open. The alarm
function automatically switches back to
standby when the door is shut.
Fast-Cooling
The Fast-Cooling button switches the appliance to maximum
cooling.
It is recommended particularly if you wish to cool
large quantities
of food, drinks, freshly baked cakes or meals rapidly.
W To switch on: Press the Fast-Cooling button 4 briefly so that
it lights up. The refrigerator temperature will drop to its lowest
value.
Note: The Fast-Cooling function uses slightly more energy. After
approx. 6 hours, however, the appliance switches back
auto-
matically
to normal energy-saving operation.
Additional functions
In set-up mode you can set the child-proof lock, adjust the
brightness of the display* and set the temperature in the
Climat-Freshbox compartment slightly lower or higher.
Activating set-up mode:
W
Press the Fast-Cooling button for approx. 5 secs - the Fast-Cool-
ing button flashes - the display shows
c for child-proof lock.
Note: the value to be altered flashes.
W Select the required function by pressing the Up/Down button:
c = child-proof lock,
h = brightness or
b = Climat-Freshbox temperature.
W Now select/acknowledge the function by pressing the Fast-
Cooling button briefly:
• For
c = child-proof lock, press the Up/Down
button to select c
1 = child-proof lock on or c0
= child-proof lock
off and acknowledge with the
Fast-Cooling button. When the symbol
6
is lit,
the child-proof lock is activated.
• For
h = brightness, press the Up/Down button to
select h
1 = minimum to h5 = maximum bright-
ness
and acknowledge with the Fast-Cooling
button.
• For
b = Climat-Freshbox temperature, press
the Up/Down button to select from b
1 = lowest
to
b9 = highest setting and confirm with the
Fast-Cooling button. The altered Climat-Freshbox
temperature adjusts slowly to the new value.
Note: b5 = factory setting. By decreasing the
temperature, "b4" to "b1", minus temperatures can
be reached and the food in the Climat-Freshbox
compartment will freeze slightly.
Exiting set-up mode:
W
To exit the set-up mode, press the On/Off button; after 2 mins.
the electronic system switches over automatically.
- The normal operating mode is activated again.
Refrigerator compartment
Arranging food in the refrigerator
It is warmest at the front at the top and in the door (suitable for
spreadable butter, cheese etc.).
Notes on cooling
- Store food so that the air can circulate freely and ensure that
the food is not packed too closely together.
Do not cover the
fan slits* at the back, otherwise the refrigerating capacity will
be impaired!
- Food which gives off or absorbs odours and flavours, and liquids
should always be stored covered or in closed containers.
Changing shelf arrangement
W You can change the position of the jar rack* and remove all
door racks for cleaning: Slide the door rack up, pull out towards
you and replace in reverse order.
W By adjusting the bottle/can holder
you can protect the bottles from falling
over when the door is opened and
closed. Always hold by the plastic
handle.
The holder can be removed for clean-
ing: pull the bottom edge of the holder
towards you and lever out.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD 8122 BF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD 8122 BF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info