556883
76
Zoom out
Zoom in
Previous page
1/89
Next page
GB 32
Symptom Possible cause Solution
The pans make a noise while
cooking.
This is caused by the energy
flowing from the hob to the
saucepan.
This is normal for certain
pans at a high cooking
setting. This is not harmful for
the pans or hob.
You have switched a cooking
zone on but the display keeps
flashing.
The pan you are using is not
suitable for induction cooking
or has a diameter of less than
12 cm.
Use a suitable pan (see pages
14 and 15).
A cooking zone suddenly
stops working and you hear
a signal.
The preset time has ended. Switch the signal off by
pressing on the - or + key of
the timer.
The hob is not working
and nothing appears in the
display.
There is no power supply
due to a defective cable or a
faulty connection.
Check the fuses or the
electric switch (if there is no
plug).
A fuse blows as soon as the
hob is switched on.
The hob has been wrongly
connected.
Check the electrical
connections.
'BR' appears in the display
and the operation does not
react.
The bridge function is
switched on.
Switch the bridge function off
(see page 18).
Fault code F00 / the red lamp
next to the child lock button
is illuminated and the lamp
above the pause button is
flashing.
The control panel is dirty or
has water on it.
Clean the control panel.
Fault code F0 ... F6 and FC. Defective generator. Contact the
service department.
Fault code F7. The ambient temperature is
not good.
Switch off all heat sources
close to the hob.
Fault code F8 and F08 / the
red lamp next to the child
lock button is illuminated and
the lamp above the pause
button is flashing.
Appliance overheated. Allow the appliance to cool
down and
start cooking once again.
Fault code F9 and/or
continuous
audible signal.
Voltage too high and/or not
connected properly.
Have your connection
changed.
FAULTS
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI8272S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI8272S in the language / languages: English, Dutch as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI8272S

ATAG HI8272S Installation Guide - English, German - 2 pages

ATAG HI8272S User Manual - German - 89 pages

ATAG HI8272S Installation Guide - Dutch, Danish, French - 2 pages

ATAG HI8272S User Manual - French - 89 pages

ATAG HI8272S Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info