556883
78
Zoom out
Zoom in
Previous page
1/89
Next page
GB 34
What you should pay attention to
Safety instructions for the installation
The connection must comply with national and local regulations.
The appliance must always be earthed.
This appliance may only be connected by a competent electrical
installer.
For the connection, use an approved cable (for example type
HO7RR) in accordance with the regulations. The cable casing must
be rubber.
The connection cable must hang freely and is not to be fed through
a drawer.
If you want to make a fixed connection, make sure that a multi-
polar switch with a contact separation of at least 3 mm is fitted in
the supply line.
The worktop the hob is built into must be flat.
The walls and the work surface round the appliance must be heat
resistant up to at least 85 °C. Even though the appliance itself may
not be warm, the heat of a hot pan can discolour or deform the wall.
Damage caused by incorrect connection, installation or use, will not
be covered by the guarantee.
Power point and plug must always be accessible.
Ensure that the connection cable cannot come into contact with
parts of the appliance which may become hot.
The appliance may not be connected to the electricity network via
an adapter or extension lead. If the above are used, it is no longer
possible to guarantee safe use of the appliance.
Only have installation, maintenance and repair work carried out by
specialists approved by the manufacturer. Otherwise the guarantee
will lapse.
The appliance must be disconnected from the electricity supply for
installation, maintenance and repair work. The appliance is only fully
disconnected from the electricity supply if:
the main switch of the house installation is switched off or
the fuse of the house installation is completely removed or
the plug is removed from the power point.
INSTALLATION
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI8272S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI8272S in the language / languages: English, Dutch as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI8272S

ATAG HI8272S Installation Guide - English, German - 2 pages

ATAG HI8272S User Manual - German - 89 pages

ATAG HI8272S Installation Guide - Dutch, Danish, French - 2 pages

ATAG HI8272S User Manual - French - 89 pages

ATAG HI8272S Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info