727248
49
Zoom out
Zoom in
Previous page
1/64
Next page
49
FAILURE DISPLAY
In case of a failure while a program is in progress, the relevant Error XX is indicated on the display unit.
Error
Error XX
ExitInfo
5
Press the INFO button to display the
error description.
Switch o the appliance and turn it back
on.
Errors indicated on the display unit may include the following:
Error Error indication on the display unit What to do?
E0 INCORRECT SETTINGS Restart the programme. If the error reoccurs, call a service
technician.
E1 THERMISTOR ERROR
Temperature sensor error.
Inlet water too cold. Repeat the washing program.
If the appliance reports this error again, call a service
technician.
E2 DOOR LOCK ERROR Turn the appliance OFF and then switch it again ON. Start the
program again. If the error reoccurs, call service technician.
E3 WATER FILLING ERROR Check the following:
is the water inlet valve open,
is the filter on the water inlet hose clean,
is the water supply hose deformed (clipped, clogged etc.),
is the pressure in the water mains between
0.1 and 1 MPa (1–10 bar).
Then, press the Exit button to resume the program.
If the error reoccurs, call a service technician.
E6 HEATING ERROR
Water heating error.
Restart the program. If the error reoccurs, call a service
technician.
E7 DRAINING ERROR
Water draining error.
Check the following:
is the pump filter clean,
is the drain hose clogged,
is the drain clogged,
is the drain hose fitted at the right height (see chapter on
drain hose installation in the instruction manual).
Then, press the Exit button again. If the error reoccurs, call a
service technician.
E8 SPINNING ERROR Turn the appliance OFF and then switch it again ON. Start the
program again. If the error reoccurs, call service technician.
E10 WATER LEVEL SENSOR ERROR Turn the appliance OFF and then switch it again ON. Start the
program again. If the error reoccurs, call service technician.
E11 OVERFLOW If there is water in the drum that exceeds a certain level,
and an error is reported on the display unit, the washing
program will be interrupted and water will be pumped out of
the washing machine. Restart the programme. If the error
reoccurs, call a service technician.
If there is water in the drum that exceeds a certain level, and
an error is reported on the display unit, while the washing
machine continues to add water, close the water tap and call a
service technician.
E12 MOTOR ERROR / MOTOR
CONTROL ERROR
Restart the program. If the error reoccurs, call a service
technician.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Asko W6098XW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Asko W6098XW in the language / languages: English as an attachment in your email.

The manual is 13.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Asko W6098XW

Asko W6098XW User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info