736695
38
Zoom out
Zoom in
Previous page
1/60
Next page
Maintenance
38
Maintenance overview
Improper maintenance can make the device unsafe for operation and result in accidents. Regular maintenance keeps you
device ready for use.
Service the device according to the following maintenance instructions.
Contact an authorised service centre if problems during maintenance occur or if you determine deficiencies during one of the
following inspections.
Component Action Maintenance
interval
A B
Device Clean.
Perform basic inspection.
Check the RC functions.
Check the safety functions.
Fuel Check fuel level.
Is the tank cap closed?
Tank, fuel valve, and
fuel line
Check parts for leaks and check for good condition.
Ventilation grid Clean.
Engine cooling Clean.
Spark plug Check/replace.
Air filter Maintain. ■▲
Blade and fastening
components
Check for wear and damage. See chapter Checking the
blade.
Change.
Clean the screw-on point of the knife blade.
Blade brake clutch Does the blade function safely and does the blade stop in
5seconds?
Drive lever Does the device stop when the lever is in neutral position
(parking brake)?
If the lever moves to neutral position when the
foot brake is actuated?
V-belt Are the belts tensioned correctly, without fissures, and in
good condition?
Bowden cables Check for proper function and ease of movement.
Acceleration lever Check for proper function.
Chassis and impact
protection
Check for rust and fissures and check the welding seams.
Are all protective devices and covers in place, fastened cor-
rectly and properly functioning?
Label Condition of the labels.
Engine Binding information
(see operating instructions of the engine manufacturer).
Check the oil level
(see operating instructions of the engine manufacturer).
Oil change.
Oil filter change.
Parking brake Check.
Check the foot brake Check the foot brake.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info