736695
37
Zoom out
Zoom in
Previous page
1/60
Next page
Maintenance
37
The engine does not start
1. Press the button “Horn/Acknowledge”(4) and “Engine
start” (5) simultaneously.
ð The engine starts automatically, it is possible that the
blade is turning.
ð You can drive for 3 minutes.
Notice: If the engine does not start, rescue with the emer-
gency driving program is not possible.
Finishing the emergency driving programme
Press the start-stop switch(1) to finish the emergency driving
programme.
Maintenance
Warning
Risk of injury due to unexpected movement. When inspec-
tions are carried out, the device can move unexpectedly.
► Make sure that no persons or objects are in the danger
area of the blade.
► Immediately press the start-stop switch on the Remote
Control Transmitter to prevent the device from moving.
► Make sure that no further hazards result from an unex-
pected movement.
Warning
Risk of injury during maintenance and cleaning work when
the engine is running.
► Perform maintenance tasks only then with a running en-
gine if this is required in the Maintenance table.
Warning
Danger of poisoning due to poisonous exhaust gases.
► Do not operate the engine in closed or insufficiently
ventilated rooms.
► Please observe the safety instruction regarding the
poisoning risk.
Prior to all maintenance and cleaning work when the engine
is not running:
1. Let the device cool down for at least 20 minutes.
2. Close the fuel valve and the tank ventilation.
3. Press the start-stop switch on the transmitter and remove
the key.
4. Switch off the device using the main switch.
Improper maintenance can make the device unsafe for oper-
ation and result in accidents. Regular maintenance keeps
your device ready for use.
Service the device according to the following maintenance in-
structions.
Contact an authorised service centre if problems during
maintenance occur or if you determine deficiencies during
one of the following inspections.
Maintenance and cleaning position
Warning
Risk of injury due to the heavy weight of the device. The
device can fall over and fall down and cause severe injur-
ies.
► Observe the following notices.
To perform maintenance, repair or cleaning tasks at the bot-
tom of the device, you can lift or tilt the device.
Lift the device only when on level and firm terrain.
Use only lifting gear or ramps that are suitable for the
weight of the device.
Attach the lifting gear only to the main frame because only
the main frame can carry the weight.
Secure the device always against tilting, falling down or
slipping.
Do not stay in the tilting area of the device.
Do not tilt the device more than indicated in the safety in-
structions regarding driving on the slope. Otherwise the
device can tilt and the device can be damaged or contam-
inations can occur due to leaking fluid.
Do not carry out tasks that can result in tilting, falling down
or slipping of the device.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info