736695

AS Motor AS 940 Sherpa 4 WD RC Manual

26
Zoom out
Zoom in
Previous page
1/60
Next page
Working in the MC mode
26
Steering in the MC mode
In the MC mode, steer with the steering wheel.
The joystick for the steering, trimming and steering reversing
are in the MC mode without function.
Driving in the MC mode
Warning
Risk of injury when driving forwards and in reverse.
► Make sure that no people are in front of or behind your
device and that your path is clear of obstacles.
► Make sure that no persons, children or animals ride
along.
Warning
Device can move jerkily. If you are standing on the device,
injuries can result.
► Do not stand up while the device is moving.
► Do not drive while standing up.
Warning
Driving on slopes is dangerous. There is a tilting and slip-
ping hazard.
► Observe the instructions in chapter “Operating modes”
and “Driving on steep terrain”.
In case of a hazardous situation, switch off the drive and de-
clutch the blade.
Brakes
Warning
The foot brake does not take effect if you hold on to the ac-
celerator lever during braking.
► Release the accelerator lever when you actuate the foot
brake.
To stop, move the drive lever slowly to neutral position.
The parking brake acts on the rear wheels. When the foot
brake is actuated, the drive lever swivels all the way to neut-
ral position/parking brake.
Use the actuation via foot pedal only in exceptional circum-
stances because the mower stops abruptly.
Driving
1. Release the parking brake.
2. Move the drive lever slowly to the desired driving direc-
tion. The more you move the lever away from the neutral
position, the faster the mower moves.
3. To stop move the drive lever slowly to neutral position or
step on the foot brake.
Reversing
Always reverse slowly. Be especially cautious when the
blade is engaged.
1. Release the parking brake.
2. Slowly move the drive lever to the rear. The more you
move the lever away from the neutral position, the faster
the mower moves.
3. To stop move the drive lever slowly to neutral position or
step on the foot brake.
Standing up while driving
If you stand up during driving, the blade is disengaged and
the engine is switched off.
When you sit down again or move the drive lever back to
neutral position before the engine stops, the engine contin-
ues to run.
Setting the cutting height
Fig.12:
Continuously adjust the cutting height with the toggle
switch(9) from 1 to 5. The current setting is displayed on the
cutting height display on the device.
Higher cutting height: Continue to press forward
the toggle switch until the desired cutting height
is reached.
Lower cutting height: Continue to press back the
toggle switch until the desired cutting height is
reached.
Highest cutting height: Out of the transport posi-
tion, move the toggle switch once briefly back.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info