707163
86
Zoom out
Zoom in
Previous page
1/89
Next page
8.16.3. Pads section
Pads Velocity Curve: Determines the velocity curve that is used by the pads.
Three settings are available: Linear (Lin), Logarithmic (Log), or Exponential (Exp).
Pads Aftertouch Curve: Determines the aftertouch curve that is used by the pads.
Three settings are available: Linear (Lin), Logarithmic (Log), or Exponential (Exp).
Pads Aftertouch Min: Sets the minimum aftertouch value that will be generated
by the pads.
Pads Aftertouch Max: Sets the maximum aftertouch value that will be generated
by the pads.
8.16.4. Keys section
Keys Aftertouch Curve: These parameters let you alter the aftertouch response of
KeyLab mkII’s keyboard. Three settings are available: Linear (Lin), Logarithmic
(Log), or Exponential (Exp).
Keys Aftertouch Min: Sets the minimum aftertouch value that will be generated
by the keyboard.
Keys Aftertouch Max: Sets the maximum aftertouch value that will be generated
by the keyboard.
8.16.5. MIDI Thru section
These two settings determine whether data will be passed between the MIDI and USB
connectors in both directions, only one direction, or not at all.
MIDI IN to USB: A setting of On allows data received at the physical MIDI In
connector to be passed over USB to your DAW or another USB device. A setting
of Off prevents this.
USB to MIDI Out: A setting of On allows data received via USB to be send to
external devices via the physical MIDI Out connector. A setting of Off prevents
this.
8.16.6. Continuous Pedal Calibration
: Each of the 5 pedal inputs has the same parameters in this section, so we'll cover them all at the
same time.
When the Mode of a Pedal is set to Control (as opposed to Switched Control), it is possible
to adjust the input to work with a wide range of variable pedals.
Pedal Min: sets the value to match the lower end of the resistor range
Pedal Max: sets the value to match the upper end of the resistor range
8.17. Import and Export buttons
You can also Import and Export all of the Device Settings, which allows you to configure any
KeyLab mkII with your preferred settings at once. An exported Device Settings file carries
the extension .keylabmkII_ds.
81 Arturia - User Manual KeyLab MkII - MIDI Control Center
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia Keylab MkII 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia Keylab MkII 88 in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia Keylab MkII 88

Arturia Keylab MkII 88 User Manual - German - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info