707163
84
Zoom out
Zoom in
Previous page
1/89
Next page
8.13. Customize the Pitch Out
Click the CV Out connector on the rear-panel graphic to edit the following settings in the
MCC.
Pitch CV Output: There are two standards: Volts per Octave and Hertz per Volt.
The choice you make for this parameter will determine which of the next two
settings is available for the next parameter. Please refer to the documentation
of the hardware instrument you want to control to find out which standard it
supports.
0V MIDI note (Volts per Octave selected): The default is C-2 (MIDI note 0), but
this can be set anywhere between C-2 and G8 (MIDI note 127).
1V MIDI note (Hertz per Volt selected): The default is C0 (MIDI note 24), but this
can be set to any MIDI note number between C-2 and G8 (MIDI notes 0-127).
Note Priority: The Pitch Out connector is monophonic, and since the KeyLab mkII
is a polyphonic keyboard controller it is necessary to specify whether the control
voltage should be based on the lowest note in a chord (Low), the highest note in
a chord (High), or the most recent note played (Last).
Pitch Bend Range (Semi-tones): This parameter determines how much the
control voltage will be allowed to change when the KeyLab mk II Pitch Bend
wheel is used. You can set the range to any value between 1 semi-tone and 24
semi-tones (2 octaves).
Pitch Assignment: With this parameter you are able to specify whether the Pitch
Out connector will receive its control voltages from Part 1 or Part 2.
8.14. Customize the Gate Out
The Gate Out connector is used to convert note on / off information from the keyboard into
trigger status events. There are three options for this parameter: S-Trig, V-Trig 5V, and V-Trig
12V. Please refer to the documentation of the hardware instrument you want to control to
find out which standard it supports.
8.15. Customize the Mod 1 / Mod 2 outputs
: The Modulation outputs have the same parameters, so we'll cover them both in this section.
These two Modulation outputs provide additional continuous control voltages for use with
modular synthesizers.
Mod CV Source: The default source is keyboard velocity, but any one of the
continuous controls on the KeyLab mkII can be used. The Select buttons can be
used, too; they toggle between the maximum and minimum voltages specified
by the next parameter.
Mod CV max voltage: This allows you to specify the range of voltages that
will be generated by the selected Modulation source, with the maximum values
selectable between 1 and 10 Volts. Please refer to the documentation of the
hardware instrument you want to control to find out which voltage standard it
supports.
79 Arturia - User Manual KeyLab MkII - MIDI Control Center
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia Keylab MkII 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia Keylab MkII 88 in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia Keylab MkII 88

Arturia Keylab MkII 88 User Manual - German - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info