707163
85
Zoom out
Zoom in
Previous page
1/89
Next page
8.16. The Device Settings tab
The upper right-hand corner of the MCC has a tab labeled Device Settings. This is where you
find the Global settings for the KeyLab mkII. There are multiple sections on this page, each
with two or more settings. Let’s take a closer look at what each parameter does.
8.16.1. Global Parameter section
Low Power Mode: When this parameter is set to On it disables the power-up light
sequence and Vegas mode.
Vegas Mode: When KeyLab mkII is left idle and untouched for around 5 minutes,
it will begin an eye-catching, colorful light show. You can choose to enable or
disable Vegas Mode by setting this parameter On or Off.
User Fader Mode: This setting changes how KeyLab mkII’s faders react in User
mode. The two settings are:
Pickup: the faders in your User preset will not generate new values
until they match the last value they transmitted. This is important
when you're dealing with 3 banks of faders: if you switch from bank
1 to bank 2, move some faders, and then come back to bank 1, you
may not want the values of the parameters being controlled by the
bank 1 faders to jump suddenly.
Jump: the faders in your User preset will generate new values as
soon as they are moved, regardless of the values they sent
previously.
8.16.2. DAW section
DAW Map: This lets you use the MCC to select which DAW preset your KeyLab
mkII will use. The complete list of presets is found here [p.34].
DAW Fader Mode: This setting changes how KeyLab mkII’s faders react within
your recording software. The two modes available are:
Pickup: the fader in your DAW will not move untill the fader position
on your controller crosses the current DAW fader position.
Jump: the fader in your DAW will jump immediately to the current
position of the fader on your controller as soon as it is moved, and
follow its movement from there.
Arturia - User Manual KeyLab MkII - MIDI Control Center 80
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arturia Keylab MkII 88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arturia Keylab MkII 88 in the language / languages: English as an attachment in your email.

The manual is 4,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arturia Keylab MkII 88

Arturia Keylab MkII 88 User Manual - German - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info