784010
66
Zoom out
Zoom in
Previous page
1/73
Next page
66Troubleshooting
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Firmware updates
Your Go 2 Camera updates its rmware automatically as new rmware is released. You can
also manually check for new rmware, and if it’s available, update your camera.
Automatic rmware updates
If your Go 2 Camera is connected to only the LTE network (not WiFi), then the Go 2 rmware
updates use cellular data to download. Minor rmware updates, which occur roughly once
every three months, use about 14 MB of data. Larger updates, which usually happen about
once a year, can be as large as 65 MB.
Arlo Go 2 rmware updates happen automatically as long as the cameras are connected to
the LTE network or WiFi, are powered on, and have at least 15 percent battery. If a rmware
update is released while your camera is turned o or disconnected or while the battery is low,
the rmware update happens automatically within 24 hours aer you turn the camera back
on, if it is connected to the network, and the battery is not low.
Automatic updates happen between 3:00 a.m. and 5:00 a.m. to minimize camera downtime
during the day. If the rmware update is a major one, you cannot view your camera live
until the rmware is updated, but motion and sound detection still work and your camera
still records based on the currently selected mode. To view your camera live, you can wait
until the update happens automatically between 3:00 a.m. and 5:00 a.m., or you can update
manually. For more information about updating your rmware manually, see Update the Go 2
Camera firmware manually on page 67.
If a rmware update is in progress, the LED on the camera blinks alternating blue and amber.
Aer this, the camera’s LED turns o for one to two minutes while the camera installs the
rmware. Aer the camera rmware update nishes, the camera connects to the network
again and the LED blinks blue rapidly.
WARNING: Do not release the camera from its housing or remove the battery while your
Arlo camera is updating and installing rmware. Wait until the camera is viewable from
your Devices feed.
If you turned o your Arlo Go 2 Camera’s LED in the camera settings, the LED does not blink
to show that a rmware update is in progress. While the LED is turned o, always make sure
that you can view your camera live from the Arlo app or a web browser before interrupting
power to the camera. If you remove the battery or otherwise interrupt power while a rmware
update is in progress, your camera might become unusable.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arlo Go 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arlo Go 2 in the language / languages: English as an attachment in your email.

The manual is 3.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arlo Go 2

Arlo Go 2 User Manual - German - 76 pages

Arlo Go 2 User Manual - Dutch - 74 pages

Arlo Go 2 User Manual - French - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info