784010
64
Zoom out
Zoom in
Previous page
1/73
Next page
64
11. Troubleshooting
Scan a QR code during setup
During setup, the camera must scan a QR code from the Arlo app when you’re setting up the
LTE connection or adding the camera to your 2.4GHz WiFi network. If your camera doesn’t
emit a chime sound aer scanning the QR code, then the QR code wasn’t successfully
scanned.
If your camera didn’t scan the QR code:
Move your mobile device farther from, or closer to, the camera lens.
Position your mobile device about 6 in. (15 cm) from the camera lens, and slowly move it
closer. If that doesn’t work, try moving your mobile device farther away. You can also try
dierent angles.
Decrease or increase the brightness on your mobile device.
Your mobile device’s brightness might be too high or too low for your camera to scan the
QR code.
If you’re in a low-light area, try setting the brightness on your mobile device to the 50
percent level.
If you’re in a bright area, try raising the brightness on your mobile device to the highest
level.
Disable Dark Mode if you’re using an iOS device.
In your iOS Settings, scroll down to nd and select Display & Brightness. Choose Light
mode under the Appearance options.
Scan the QR code in an evenly lit area.
Avoid scanning the QR code in the dark or in direct sunlight. If you are installing outside at
night, turn on porch lights. If your camera is exposed to direct sunlight during installation,
provide some shade.
Check your mobile devices camera permissions.
On your Android or iOS device, ensure that the Arlo app has access to the phone’s camera
in device settings.
Try using a mobile device with a larger screen such as a tablet or iPad, if available.
Clean the camera lens.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arlo Go 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arlo Go 2 in the language / languages: English as an attachment in your email.

The manual is 3.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arlo Go 2

Arlo Go 2 User Manual - German - 76 pages

Arlo Go 2 User Manual - Dutch - 74 pages

Arlo Go 2 User Manual - French - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info