702731
10
Zoom out
Zoom in
Previous page
1/79
Next page
10
Aligning the cells visually
1. Slightly unscrew the module’s adjustable
support.
2. Position your eye at an oblique angle about
5 cm from the module as shown in the
diagram to the right.
3. Look in the mirror inside the module to see
the image of the module opposite through
the hole in the side of the cell.
4 – Horizontal alignment: Rotate the
adjustable support by up to 90°
– Vertical alignment
(SB2100/SB4100/SB4200): Turn the
thumbscrew by up to 10°
– Vertical alignment (SB250 and SB450):
Rotate the beam cell.
5. Once the optimal alignment has been
achieved, tighten the screw of the adjustable
support to lock horizontal rotation.
Optimising the reception
Power up the detector, making sure that the green LED on the transmitter and the red LED
on the receiver light up. Depending on the detector type, proceed as follows:
50 m 100 m 150 m 200 m
SW1 SW2 SB51**
SB4200* SW1 & SW2 = OFF
Operational OFF OFF
SB4100* Align lower beam ON OFF
Align upper beam OFF ON
SB450* Not permitted ON ON
SB2100***
SB250***
SW1 & SW2 = OFF
* For distances less than 150 m, first select the beam cell to align by setting DIP switch 1
to ON for the lower beam cell and then DIP switch 2 to ON for the upper beam cell on both
the transmitting and receiving modules.
** For distances greater than 150 m, we strongly recommend the use of the alignment
controller (SB51). Leave the DIP switches in the OFF position.
*** Leave the DIP switches in the OFF position.
50
1
2
3
4
600
ms
Alarm
Disq.
Align.
B1 B2
Channel
RECEIVER
Delay
S
I
G
N
A
L
+ terminal for
measuring
received signal
- terminal for
measuring
received signal
Viewfinder image
View-
finder
Vertical adjustment
thumbscrew for
SB2100/SB4100/
SB4200 modules
oblique
angle
5 cm
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech SB 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech SB 250 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info