702731

Aritech SB 250 Manual

11
Zoom out
Zoom in
Previous page
1/79
Next page
11
Connect a voltmeter to the + and – terminals for measuring the signal received on the
receiver unit, and look for the maximum deviation by optimising the direction of each cell.
The alignment controller SB51 can be used to optimise the positions of the transmitter
cells in the event of alignment problems.
When the beam cells are correctly aligned, do not forget to set DIP switches 1 and 2
to OFF.
Voltage measured Alignment
SB2XX SB4XX
> 1.0 V > 1,2 V Excellent*
0,5 to 1,0 V 0,7 to 1,0 V Good
< 0,5 V < 0,7 V Poor
* An excellent alignment only occurs under the following conditions:
1. Low ambient lighting. For example, at night, early morning, or dusk.
2. Perfect weather conditions, dry, and visibility greater than 5 km.
The values in the table above are given for voltages measured while the terminal is in
normal operating mode (DIP switches 1 and 2 are OFF on both the transmitter and the
receiver).
Caution: When several detectors are placed one above the other (for example,
on a column), disconnect the other transmitters on the column that are not
being aligned with the receiver.
6. Using the alignment controller (SB51)
1. Using
The alignment controller SB51 is used to align the SB250, SB2100, SB450, SB4100 and
SB4200 detectors. It is equipped with powerful LEDs and a buzzer that indicate the signal
level received at the receiver module. It should be connected to the receiver module.
The frequency of the buzzer and the LEDs indicates the quality of the alignment. This
frequency increases as the signal received by the receiver beam cells improves and vice
versa.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech SB 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech SB 250 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info