557702
15
Zoom out
Zoom in
Previous page
1/24
Next page
User Manual for CD72/95/15003
Page 15
D
ISARMING A SPLIT SYSTEM
If you enter the premises when the system is armed, the buzzer will begin to beep (if programmed) with
an intermittent tone to indicate that the entry period has begun. As long as this beeping continues, you
can disarm (switch off) the system with your code without activating an alarm. You also must not enter
other areas of the system during the beeping. If you do, a siren will sound and a full alarm condition
may occur. The entry period (length of time of the beeping) is programmed by the installer.
1. Go to the keypad. The entry period starts as soon as you
open the entrance door, or when you enter the entry
zone. You can switch off the system without activating the
alarm as long as the beeping continues.
Beep Beep
The current day, date and time are displayed. An example
is shown.
TUE 23 APR 07.39
2. Press the key
0
and then enter your code. A ‘*’
appears in the display for every key you press. Use the
0
key to cancel an incorrect entry and to restart a new entry
of the code.
Enter Code
0 + code
Enter Code ****
In this example, area 1 is armed and area 2 disarmed.
Area 1 Armed
Area 2 Disarmed
You have a few seconds to enter the number of the area
you want to switch off.
Enter Area No.
3. Enter the area number (in this example it is 1).
1
Disarm?
4. Press the
Accept
key to confirm you want to switch off
area 1.
!
!!
!
Area 1 Disarmed
Finished?
5. Press the
Accept
key to confirm you have finished.
!
!!
!
Area 1 Disarmed
Area 2 Disarmed
6. If you want to disarm or modify another area, enter its
number.
If you are finished, do nothing. The standby display
message will automatically appear after a few seconds.
Enter Area No.
Steps 4 and 5 may be automated by the system. If so,
you will not have to press the
Accept
key.
TUE 23 APR 07.40
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aritech CD 7203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aritech CD 7203 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info