719964
38
Zoom out
Zoom in
Previous page
1/64
Next page
38 /
SETTINGS - ADJUSTMENT - PROBLEM IDENTIFICATION MENUS
2 5 3 NOT PRESENT
2 5 4 NOT PRESENT
2 5 5 NOT PRESENT
2 9 RESET MENU 2
2 9 0 Automatically resetting to the default setting in
menu 2
Reset
OK = yes
ESC = no
To reset all default parameter settings,
press the MENU button
4 ZONE 1 PARAMETER
4 0 ZONE 1 TEMPERATURE SETTING
4 0 0 Zone 1 comfort temperature setting "Comfort
ambience T"
from 10 to 30 °C 19 Activated only with the modulating
device connected (option)
4 0 1 Zone 1 reduced temperature setting "Reduced
ambience T"
from 10 to 30 °C 16
4 0 2 Heating fixed temperature setting "Heating fixed
temp"
from 20 to 82 °C 70 Activated only with temperature con-
trol and fixed temperature
4 1 Entering access code 222 press the programming "+" button to
select 234 and press the meNu button
4 2 ZONE 1 SETTING
4 2 0 Heating appliance temperature value setting 0 = from 20 to 45°C (low temperature)
1 = from 35 to 85°C (high
temperature)
1 select in the appliance type base
4 2 1 Basic heating control type selection type depending
on the peripheral devices connected
0 = fixed flow temperature
1 = device On/Off
2 = ambient sensor only
3 = external sensor only
4 = ambient sensor + external sensor
1 To activate heating control, press
the AUTO button. The Auto light is
illuminate
4 2 2 Slope 0_2 to 3_5 1_5
If the external sensor is used, the boiler calculates the
most suitable heating flow temperature taking the
external temperature and the type of appliance into
account.
The type of curve must be chosen according to the
type of appliance radiator and the heat losses present
in the building.
°C
20
25
15
30
40
50
60
70
80
90
100 °C
10
2.5 3.0 3.5 2.0
1.5
1.2
1.0
0.8
0.6
0.4
0.2
5 0 -5 -10 -15 -20 °C
External temperature
High temperature
Flow Temperature
low temperature
Ambiente t
emperature
setting v
alue
4 2 3 Parallel shift - 20 to + 20 0
To adapt the thermal curve to the appliance requirements, it is possible to perform a parallel shift of the curve in order to alter the calculated
flow temperature and therefore the ambient temperature.
The shift value between - 20 and + 20 is shown on the display. Each level corresponds to a 1°C increase in the flow temperature in relation to
the initial setting.
4 2 4 Compensation 0 to + 20 20
if setting = 0, the temperature taken from the ambient sensor does not affect the
calculation of the setting. If setting = 20, the temperature taken has maximum
influence on the setting.
4 2 5 Zone 1 heating maximum temperature setting 35 to + 82°C 82 if parameter 420 = 1
20 to + 45°C 45 if parameter 420 = 0
4 2 6 Zone 1 heating minimum temperature setting 35 to + 82°C 35 if parameter 420 = 1
20 to + 45°C 20 if parameter 420 = 0
4 3 DIAGNOSTICS display only
4 3 0
Zone 1 room temperature
Activated only with the modulating
device connected (option)
4 3 1
Zone 1 set temperature
4 3 2
Zone 1 heat request
0=OFF
1=ON
4 3 3 NOT PRESENT
menu
sub-menu
Parameter
Description value
default setting
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston Clas HE R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston Clas HE R in the language / languages: English as an attachment in your email.

The manual is 16,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info