719964
37
Zoom out
Zoom in
Previous page
1/64
Next page
/ 37
SETTINGS - ADJUSTMENT - PROBLEM IDENTIFICATION MENUS
menu
sub-menu
Parameter
Description value
default setting
2 BOILER PARAMETER SETTING
2 1 Entering access code 222 press the programming "+" button to
select 234 and press the meNu button
2 2 BOILER GENERAL SETTING
2 2 0 Slow ignition 0 to 99 60 RESERVED FOR SAT
2 2 1 Minimum ambient temperature for antifreeze
activation
from 2 to 10 °C 5 Activated only with the modulating
peripheral device (optional)
2 2 2 NOT PRESENT
2 2 3 Underfloor thermostat or zone 2 ambient thermostat
selection
0 = Underfloor safety thermostat
1 = Zone 2 ambient thermostat
1 Do not modify
2 2 4 NOT PRESENT
2 2 5 NOT PRESENT
2 2 6 NOT PRESENT
2 2 7 NOT PRESENT
2 2 8 Boiler Version
Do not modify
0 to 5 0 RESERVED FOR TECHNICAL
ASSISTANCE Only if the PCB is
changed
2 3 BOILER PARAMETER  PART 1
2 3 0 NOT PRESENT
2 3 1 Maximum heating power setting 0 to 99 see the "gas setting" table, in
commissioning
2 3 2 Domestic hot water maximum RPM percentage
CANNOT BE MODIFIED
0 to 99 RESERVED FOR TECHNICAL
ASSISTANCE Only if the gas or PCB is
changed
see "gas setting" table in
commissioning
2 3 3 Minimum RPM percentage
CANNOT BE MODIFIED
0 to 99
2 3 4 Heating maximum RPM percentage
CANNOT BE MODIFIED
0 to 99
2 3 5 Selection of ignition delay type when heating
0 = Manual
1 = Automatic
1 see section on "gas setting" in
commissioning
2 3 6 Ignition delay when heating timer setting from 0 to 7 minutes 3
2 3 7 Post-circulation when heating from 0 to 15 minutes or OC (AC) 3
2 3 8 NOT PRESENT
2 3 9 NOT PRESENT
2 4 BOILER PARAMETER  PART 2
2 4 0 NOT PRESENT
2 4 1 NOT PRESENT
2 4 2 NOT PRESENT
2 4 3 Post-ventilation after heating request 0 = OFF
1 = ON
0
2 4 4 Time delay after heating temperature increase from 0 to 60 minutes 16 activated only with thermostat On/
Off and heating control activated
(parameter 421 or 521 = 01
This parameter allows the time delay to be set before automatic increase of the flow temperature calculated in increments of 4°C (max 12°C). If this
parameter retains the value 00, this function is not active.
2 4 5 NOT PRESENT
2 4 6 NOT PRESENT
2 4 7 Device indicator for heating circuit pressure 0 = temperature sensor only
1 = pressure switch at minimum
2 = pressure sensor
0 RESERVED FOR TECHNICAL
ASSISTANCE Only if the PCB is
changed
2 4 8 NOT PRESENT
2 5 DOMESTIC HOT WATER PARAMETER
2 5 0 NOT PRESENT
2 5 1 NOT PRESENT
2 5 2 NOT PRESENT
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston Clas HE R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston Clas HE R in the language / languages: English as an attachment in your email.

The manual is 16,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info