579881

Ariston ALYS Manual

42
Zoom out
Zoom in
Previous page
1/152
Next page
42
GB
CONNECTION PIPING
PIPE UNIONS
LIQUID COCK
GAS COCK
4. Connect the pipes using two spanners, taking care not to damage the
piping. If the tightening force is insuffi cient, then there may well be
leaks. And if the tightening force is excessive, then there may also be
leaks as the fl ange could be damaged. The safest system is constructed
by tightening the connection using a fi xed spanner and a dynamometric
spanner: in this case, use the table "tightening torques for fl ange con-
nections".
5. We recommend you leave an extra 50 cm of pipe for any subsequent
work carried out in the vicinity of the cocks.
2.8 Connections to the external unit
Screw the pipe unions onto the external unit connections with the same
tightness as for the internal unit.
To avoid leaks, pay particular attention to the following points:
- Tighten the pipe unions, taking care not to damage the piping.
- If the tightening force is insuffi cient, then there may well be leaks. And
if the tightening force is excessive, then there may also be leaks as the
fl ange could be damaged.
- The safest system is constructed by tightening the connection using a
dynamometric spanner: in this case, use the tables below (for copper
piping).
TIGHTENING TORQUES FOR FLANGE CONNECTIONS
Pipe Tightening torque
[kgf x cm]
Corresponding effort
(using a 20 cm spanner)
6.35 mm (1/4”) 160 - 200 wrist force
9.52 mm (3/8”) 300 - 350 arm force
12.70 mm (1/2”) 500 - 550 arm force
15.88 mm (5/8”) 630 - 770 arm force
TIGHTENING TORQUE FOR PROTECTION CAPS
Tightening torque [kgf x cm]
Service connection 70-90
Protection caps 250-300
LENGTH OF THE PIPING
The maximum length for the connection piping varies depending on the
model. When the length is over 5 m, take care to add the right amount of
refrigerant per metre.
If you need to install the external and internal units with a height difference
over 5 m (fi g. B and fi g. C), use siphons on the gas piping in order to allow
oil to return to the compressor properly.
NOTE:
We recommend making a loop in the piping near the external unit, so as to
reduce the vibrations transmitted from that point.
IMPORTANT: CHECK FOR REFRIGERANT LEAKS
Once you have created the connections and a vacuum, open the cocks so
that the gas fi lls the piping and always check for leaks using a leak detec-
tor (risk of personal injury from cold burns).
2.9 Creating a vacuum and checking the seal
A vacuum pump suitable for use with R410A must be used to bleed the
circuit.
Make sure the vacuum pump is fi lled with oil to the level indicated by the
oil indicator light, and that the two cocks on the external unit are shut off:
max 8 (10) m
5 m
fi g. B
max 8 (10) m
5 m
fi g. C
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ariston ALYS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ariston ALYS in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info