755638
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
T T - 3 M a n u a l
Amplifier connection
There is a RCA output on the rear panel of the turntable. Connect
the RCA plug to this output, and then to the PHONO INPUT of your
amplifier. Red plug into R channel input, White plug into L channel
input. If your amplifier does not have an input suitable for phono
cartridges, you will require a separate phono amplifier stage for MM
or MC cartridges such as the Argon Audio PHONO1, which can
then be connected between the record player and a free line level
input of the amplifier. The ground wire of the tonearm lead should
be connected to the earth terminal on your amplifier (if provided).
Playing a record
1) Place the record on the turntable. If it is a 45 rpm, you need to
place the adaptor on the record spindle.
2) Switch on the power.
3) Pull up the arm lifter, and then release the arm lock clip.
4) Place the cartridge vertically over the first track of the record.
5) Rotate the RPM knob to the speed you want to play, which will
cause the platter to start turning.
6) Lower the arm lifter. The stylus will touch the record and start
playing music.
7) When the record is done, lift the tone arm up, lead it back to the
arm rest and lock it.
8) To pause the playing, lift the tone arm by pull up the arm lifter,
and then turn the speed knob to “OFF”.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon TT3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon TT3 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info