755638
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
T T - 3 M a n u a l
7. 33/45 RPM Switch (33/off/45):
Select 33 or 45 rpm for playing a vinyl, switch to OFF to pause
the playing. Switch to 33 or 45 again, to continue the playing
from the pause point.
8. Signal Connectors
Plug in the RCA cable, and connect the cable to audio amplifier.
9. Ground Terminal
Connect a ground wire.
10. Power supply jack:
Plug-in DV12/0.5A switching adaptor for power supply.
11. Power Switch
Turntable Platter and Belt Setup
1. Install the drive belt over the inner ring under the platter and
make sure it won’t fall off during the
setup.
2. Place the platter through the turntable
spindle, then rotate the platter until you
see the drive motor pulley through the
window at the top left corner.
3. Carefully grab the drive belt and put it
around the slot of motor pulley.
4. Connect the power adapter to the turntable and power on the
turntable. Set the speed to either 33 or 45. If the platter does not
spin, try the steps listed above again.
5. Remember to place the rubber slip mat on the platter before
playing records.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon TT3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon TT3 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info