755638
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
T T - 3 M a n u a l
Cartridge downforce adjustment
1. Gently push and turn the Counterweight onto the rear of the
tonearm (with the scale facing toward the front of the turntable).
2. Remove the cartridge protection cap.
3. Lower the tonearm lift and position the cartridge in the space
between tonearm rest and platter.
4. Carefully rotate the Counterweight until the tonearm balances
out. The tonearm should return to the balanced position if it is
moved up or down. This adjustment must be done carefully.
5. Once the tonearm is correctly balanced return it to its rest. Hold
the Counterweight without moving it, and gently rotate the Down
force Scale ring (the part with numbers on it) to 0. Check whether
the arm still balances out.
6. Rotate the counterweight counter clockwise (seen from the front)
to adjust the down force according to the cartridge manufacturer’s
recommendations.
NOTE: The recommended downforce for the factory fitted cartridge
is 1.75g.
Anti-skating adjustment
Turn the Anti-skating Control to the same value as the adjusted
downforce. The recommended downforce for the factory fitted
cartridge is 1.75g.
Mains connection
An external switching power adaptor (DC12V 0.5A) is supplied with
this turntable. Connect the turntable to a mains voltage of
110V/60Hz or 230V/50Hz.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon TT3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon TT3 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info