665482
17
Zoom out
Zoom in
Previous page
1/30
Next page
EG
17
Emix unit can be used with outdoor unit G30 and G42 in a specic conguration in order to create an heat pump system
for DHW only production.
Only DHW application: G30 / G42 + Emix
Connect Emix unit to the only refrigerant port (G30) or to the re-
frigerant port A (G42) on the outdoor unit, using 1/4 ->3/8 adapter
provided with outdoor unit.
The system will operate always in heating mode.
Remove JP1 from PCB of Emix unit before switching on the
system unit.
In this application, you can not connect other indoor units to G42.
EMIX CONNECTION - ONLY DHW APPLICATION - G30 / G42
SWITCHES SETTING (CONTROL BOARD)
SW1: SETTING OF CONNECTED ELECTRICAL HEATERS’ NUMBER
See section “Connection of electrical heater elements”.
SW2: SETTING OF TANK VOLUME
Set SW2 in order to select the water volume of the tank connected to Emix:
OFF - OFF = 300 l ON - OFF = 220 l
OFF - ON = 140 l ON - ON = 80 l
Factory setting
NOTE
In the case of intermediate size, select the next higher volume.
WARNING !
Power down the system before changing the settings.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Emix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Emix in the language / languages: English, German, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Emix

Argo Emix User Manual - English - 29 pages

Argo Emix User Manual - German - 29 pages

Argo Emix User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info