160350
21
Zoom out
Zoom in
Previous page
1/30
Next page
E-21
movie 2.1
solo
English
Selecting the DVD player
Press the DVD button on the remote control, or use the
front panel – SOURCE and SOURCE + keys to select the
DVD player.
Remember that to use the CR100 remote
control for DVD playback, you first have to set it
to DVD mode by pressing the
DVD button.
Basic operation
Loading a disc
Press
<
/
1
on the front panel (or OPEN on the remote
control) and place the disc on the tray, with the playback
side facing down (some discs are double sided, in which
case the side labelled ‘side A’ should face up to play side
A).
Press
<
/
1
on the front panel to close the tray. The disc
loads after a pause of a few seconds.
Playing a disc
Many DVDs begin playing automatically, but some titles
begin by displaying a menu. Select the menu item ‘Play
movie’ (or similar) using the cursor pad, then press OK to
start playback.
For discs that do not play automatically (including CDs
and VCDs), press
4
/
;
.
watching
movies
MENU SOURCE INFO OK
POWER
VOLUME
TAPE


Front-panel controls
Switching on
Ensure that the unit is receiving mains power and the
main switch on the back of the unit is turned on, then
press the POWER button to switch Solo Movie 2.1
between ‘on’ and ‘stand-by’.
When Solo Movie 2.1 is in stand-by the light next to
the power button on the front-panel glows red, and
the front-panel display shows the current time. Pressing
POWER when the unit is in stand-by will cause the unit to
switch on and the power button light turns blue.
To select ‘hard stand-by’, press and hold the front panel
POWER button. Hard stand-by mode retains clock settings
but reduces power consumption to less than one watt.
Solo Movie 2.1 can only be brought out of hard stand-by
by pressing the front panel POWER button (not from the
remote control).
Fast play
Press and hold
8
or
7
on the front-panel or remote
control to play fast forwards or backwards.
By pressing the
8
or
7
buttons on the remote control,
more control over the fast forward or backward speeds
of DVDs, VCDs and CDs is possible. Press the remote
control button repeatedly to cycle through the different
fast playback speeds available: x2, x4, x8, x16, x50 and
x100.
To resume normal playback speed, press
4
/
;
.
Fast playback is not available for MP3/WMA discs.
Skipping chapters/tracks
To skip chapters (or tracks on a CD), press
/
or
0
.
When skipping back, the first button press takes you to
the beginning of the current chapter. Pressing the button
again takes you to the start of the previous chapter.
Pausing playback
Press
4
/
;
on the front panel or
;
on the remote
control to pause playback. To resume playback, press
4
/
;
on the front panel or
4
on the handset.
Stopping playback
Press the
<
/
1
button on the front panel or
<
on the
remote control to stop playback.
When playing a DVD, pressing
STOP once performs a
‘resume stop’. If you now press
4
/
;
, playback of the
movie resumes from the point it was stopped.
DVD/VCD special playback
modes
This section explains the special playback modes for
DVDs and VCDs. The operations described here are not
exactly the same for DVDs and VCDs, but very similar.
Note that many VCDs have a single track, so some
operations involving tracks will not be relevant.
Jumping to a particular point
Press the SRCH button on the remote control to open
the ‘Search’ menu:
A jump can be performed using different specifiers: jump
to a particular time or to a specified chapter/track on
the disc.
Closing the Search menu
When displayed, this menu screen can be closed again
by pressing the SRCH button (which also has the effect of
cancelling the search).
Special playback modes
Repeat, shuffle or looped (A-B repeat) playback modes
are available.
Repeat
Press the RPT button on the remote control to cycle
through the repeat options. For DVDs, a chapter or title
repeat may be selected (i.e., play continuously the current
chapter or the current title). For VCDs, a track or disc
repeat is available.
When a chapter/track repeat is selected, the ‘Repeat
one’ symbol on the front panel display is shown and the
current chapter/track is repeated. If a title/disc repeat is
selected, the ‘Repeat all’ symbol is shown and the current
title/disc is repeated.
To cancel repeat, press the
RPT button until ‘Repeat: Off
is displayed.
Time
Highlight the ‘Time’ field and enter the time in hours,
minutes and seconds, then press OK. The Search menu is
removed from the screen and playback starts from the
time specified. Invalid time entries are ignored.
Title/Chapter
(Applies to DVDs only) To jump to a title or chapter,
highlight the title/chapter position and enter the number
of the title/chapter to jump to, before pressing OK. It is
possible to jump to a chapter within a different title to
the current one by entering a value into both fields. Note
that specifying a title without a chapter will jump to the
first chapter in the title.
Group/Track
(Applicable to DVD-Audio discs only.) To jump to a
group or track, highlight the group/track position and
enter the number of the group/track to jump to, before
pressing OK. It is possible to jump to a track within a
different group to the current one by entering a value
into both fields. Note that specifying a group without a
track will jump to the first track in the group.
Track
(Applies to VCDs only) To jump to a specified track on
a VCD, enter the track number in the ‘Track’ field, then
press OK. Note that many VCDs have only one track.
Shuffle
Press the RND button on the remote control to switch
shuffle play on. This causes the chapters/tracks to be
played in random order.
To cancel random play, press the
RND button for a
second time.
A-B repeat
The Solo Movie 2.1 can repeat a specific section of a
DVD or VCD; this is called an A-B repeat.
To perform an A-B repeat, wait until the disc is at the
point where you want the repeat to start, then press
SHIFT + RPT. The OSD shows a repeat symbol, followed
by ‘A–’, and the front panel shows ‘A–’.
Press
SHIFT + RPT again at the point you want the repeat
to end. The repeat symbol, followed by ‘A-B’ is shown on
the display device, and the front panel shows ‘A-B’. The
selected section is repeated in a loop.
To cancel the A-B repeat, press
SHIFT + RPT again. An
‘Off message is displayed on the OSD.
If you press
<
twice, this is a ‘complete stop’, and
playback resumes from the beginning of the disc.
Ejecting a disc
To eject a disc, press
1
on the remote control, or press
and hold (for more than one second) the
<
/
1
button
on the front panel.

21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam solo movie 2 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam solo movie 2 1 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam solo movie 2 1

Arcam solo movie 2 1 User Manual - German - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info