159827
7
Zoom out
Zoom in
Previous page
1/36
Next page
MS250
7
Positioning the unit
<
Place the MS250 on a level, rm surface. Ensure that the surface you have chosen is strong
enough to take the weight of the MS250.
<
Avoid placing the unit in direct sunlight or near sources of heat or damp.
<
Do not place the unit on top of an amplier or other source of heat.
<
Ensure adequate ventilation. Do not place the unit in an enclosed space such as a bookcase
or closed cabinet unless there is good provision for ventilation. The MS250 is designed to run
warm during normal operation.
<
Make sure the IR receiver on the front panel is unobstructed or you may nd the remote control
is unreliable. If line-of-sight is impractical, an infrared remote repeater can be used with the rear
panel IR connectors (
REMOTE IN).
<
Do not place your record deck on top of this unit. Record decks are very sensitive to the noise
generated by mains power supplies which will be heard as ‘hum’ if the record deck is too close.
Back panel connections
Video output
A video connection may be used to view the menus of the MS250 on a TV or computer monitor. The
MS250 does not have to be connected to a video display for day-to-day use, as all basic functionality is
available via the front-panel. However, to gain access to advanced features, for product conguration,
and for improved ease-of-use, a video display is required.
There are three different video outputs available from the MS250: VGA, S-Video and Composite Video.
Choose one that your display supports, connect it with a suitable cable and, if required, congure the
output to match using the ‘TV Standard’ menu option within Settings
)
Display.
4
S-Video
The S-Video output (also known as S-VHS or Y/C) is commonly supported by
display devices worldwide. Connect the
S-VIDEO output of the MS250 to the
S-Video input of the display device using an S-Video cable of an appropriate length.
5
Composite
video
If your display device offers a composite input (sometimes labelled CVBS or just
‘video’), connect this to the
COMPOSITE video output of the MS250 using a 75Ω
phono cable suitable for video use.
2
VGA
The 15-pin VGA connector is used commonly by computer monitors and is often
available on other display devices. The MS250 produces SVGA output for this port.
Note that you may connect equipment such as AV receivers in the signal path between the MS250 and
the display device, as long as the connected equipment also supports the type of video signal you intend
to use. For instructions on how to connect AV equipment, consult the manual for that equipment.
Keyboard connector
1
Characters can be entered into an on-screen text eld using the CR-425 remote control. If you have a
large number of track titles to enter by hand, however, you’ll nd that connecting an external keyboard
is much more convenient.
You can connect either a PS/2 or a USB keyboad. If you are using a PS/2 keyboard, connect it to the
KEYBOARD socket before the MS250 is powered on, otherwise it may not be recognised. A USB keyboard
can be connected to the
BACKUP USB connector on the rear panel or to the front panel USB connector.
You can connect or disconnect a USB keyboard at any time.
Installing and connecting
ZONE4ZONE 3
ZONE2ZONE 1ZONE 1
115–230VAC
100CVA MAX
ZONE 1
COAXOPTICAL
ZONE 4ZONE3
ZONE2ZONE 1
S-VIDEO
COMPOSITE
VIDEO
RS232
CONTROL
VGA
KEYBOARD
ZONE 2
INPUTS
DIGITAL OUTPUTS TRIGGER OUTREMOTE IN
NETWORK
BACKUP
ZONE4ZONE 1
L
R
ZONE 3ZONE 2
OUTPUTS
L
R
AUX 1 AUX 2
IR
OUTPUT
 


7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam fmj ms250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam fmj ms250 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info