159827
6
Zoom out
Zoom in
Previous page
1/36
Next page
MS250
6
Conventions used in this document
Zones
The MS250 supports up to four zones. The term ‘Zones’ refers to the four stereo analogue outputs
supported by this product. Zone 1 corresponds to the room where the MS250 is situated: Zones 2, 3 and
4 are the other three analogue output locations.
Before making connections
Before connecting your equipment it is important to think about the following points, as these will affect
your choice of connections and subsequent use of the system.
Video
Normal, everyday control of the MS250 is by remote handset (or the front panel control buttons) and the
front panel display. However, to access certain features of the MS250, you will need to connect a TV or
monitor. A USB or PS/2 keyboard can also be added to make text entry more convenient.
Your MS250 supports three different video connection types: VGA, S-Video, or Composite video. Choose
a connection that your TV/monitor supports.
Audio inputs
Two stereo line-level inputs are provided on the rear panel to allow routing and recording of analogue
sources, such as a DAB tuner. The audio signal from theses inputs can be routed to any of the Zones.
If you wish to listen to more than two external sources, you may wish to invest in an external switch or
pre-amp to use for input selection.
Note that to connect a record deck to the MS250 you will require a phono pre-amp.
Audio outputs
The MS250 supports analogue, digital (S/PDIF) and networked audio connections.
With the possible exception of networked connections, all of these methods require you to route cables
from the MS250 to an appropriate amplier or receiver in the remote location. Analogue connections
require a stereo phono cable to be routed to an amplier; digital connections require a remote receiver
or D/A converter; and networked connections require a PC or similar network audio receiver.
Think carefully about the type of connection you wish to use for each remote location before starting to
equip a new multi-room installation: we recommend asking your dealer for advice at the planning stage
before installation work is commissioned.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam fmj ms250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam fmj ms250 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info