801481
5
Zoom out
Zoom in
Previous page
1/25
Next page
ENGLISH
UNO G8 Series | User manual
8
9
User manual | UNO G8 Series
Series
1 ANTENNA
It allows the transmission of the
signal.
2 MULTI-FUNCTION DISPLAY
This LCD features a number of
controls and indicators, such as the
group and channel number, icons of
MUTE and lock, and the 4-segment
battery status indicator.
NOTE: the backlight automatically
turns off after a short while.
3 ON/OFF - MUTE
Press this button for 2” to turn on or
off the beltpack transmitter.
Press it briefly to turn ON/OFF the
MUTE function.
4 ASC/LOW BATT
Green LED steadily lit: transmitter on.
Green LED flashing: channel synchronization, ASC in progress.
Red LED steadily lit: MUTE function activated.
Red LED flashing: low battery.
5 IR WINDOW
It allows the synchronization of the channel (frequency) with the receiver.
After pressing the receiver ASC button, place the bottom of the beltpack transmitter
close to the IR window of UNO G8R receiver and wait for the selected channel to stop
flashing on the handheld display. After few moments the synchronization process
ends, and the RF signal level indicator will show the presence of signal.
6 SELECT
Press this button to select functions, and to set receiver parameters values.
7 BATTERIES COMPARTMENT
To replace the batteries, lightly press on the sides of the cover and lift forward.
Take out the old batteries, and insert two new batteries (respecting the compartment
icons) then close the lid. Remove the batteries from the receiver when not in use for
extended periods.
3 | SYSTEM SETUP
To achieve the best reception, please place the receiver at least 1 m
high and put the antennas vertically upwards. Avoid placing the receiver
close to metal objects or digital control devices (CD players, computers,
console, and so on). The receiver and transmitter must have a direct
“visual contact”.
3.1 | RECEIVER SETUP
LCD main window shows indicators of audio (AF) and radio-reception
(RF) levels, followed by the indicators of Squelch (SQL), VOLUME, GROUP,
CHANNEL, ANTENNA DIVERSITY, SYNC and the lock icon, when it’s active
To proceed with the adjustments, please use SET and up/down buttons.
GROUP SELECTION
Press the SET button until when “GROUP” appears in the display. Use the
up and down buttons to select the desired group of frequency, then press
again SET to scroll following parameters and to conrm the choice.
2.3 | BELTPACK TRANSMITTER - UNO G8B
12 63 98 41
5
7
8 MINI XLR-M INPUT
Connect to this input the provided HS-03 headset or the signal from
other sound sources.
9 GAIN SELECTOR
There are three different gain settings:
Mic: for supplied headset microphone and other microphones
0 dB: low output level instruments
-10dB: high output level instruments
WEARING THE BELTPACK
RECEIVER:
Clip the receiver to a belt or to
the shoulder strap of your guitar.
For better fastening reliability it’s
preferable to secure it as shown
in the gure, then fasten it in a
way that the belt is tight from
the clip.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT Uno G8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT Uno G8 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info