801481
4
Zoom out
Zoom in
Previous page
1/25
Next page
ENGLISH
UNO G8 Series | User manual
6
7
User manual | UNO G8 Series
Series
231 4
REAR PANEL
2.2 | HANDHELD MICROPHONE - UNO G8M
1 GRILLE
It protects the microphone capsule from impacts and/or accidental falls
and it reduces the noise of the plosive.
2 MULTI-FUNCTION DISPLAY
This LCD features a number of controls and indicators, such as the group
and channel number, icons of MUTE and lock, and the 4-segment battery
status indicator.
NOTE: the backlight automatically turns off after a short while.
3 ON/OFF
Press this button for 2” to turn ON or OFF the handheld wireless mic.
Press briefly this buttton to turn ON/OFF the MUTE function.
4 BI-COLOR INDICATOR
GREEN LED: microphone ON
RED LED: MUTE activated
5 BATTERIES COMPARTMENT
To access the battery compartment unscrew the lid counterclockwise,
and screw the lid clockwise to close it. To replace batteries unscrew the
lid counterclockwise, lift the batteries, insert two AA type new batteries
(following the compartment icon) and screw the lid clockwise.
In order to ensure proper operation, make sure the lid is securely screwed.
Remove the batteries from the transmitter when not in use for extended
periods.
6 GAIN
To access to GAIN adjustment, unscrew the lid counterclockwise.
Turn the screw clockwise to raise the gain, anticlockwise to reduce it.
7 IR WINDOW
It allows the synchronization of the channel (frequency) with the receiver.
After pressing the receiver ASC button, place the bottom of the wireless
microphone close to the IR window of UNO G8R receiver and wait for
the selected channel to stop flashing on the handheld display. After few
moments the synchronization process ends, and the RF signal level
indicator will show the presence of signal.
21 3 4 56 7
1 “DC 12-18V” POWER SOCKET
Connect to this socket only the supplied power supply.
2 UNBAL
Unbalanced audio output with 6,35mm (1/4”) jack. Connect this output to an
unbalanced input of your mixer.
3 BALANCED
Balanced audio output with XLR-M socket. Connect this output into a balanced input
of your mixer.
4 A/B SOCKETS
Connect the provided antennas to these panel BNC sockets.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT Uno G8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT Uno G8 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info