801481
3
Zoom out
Zoom in
Previous page
1/25
Next page
ENGLISH
UNO G8 Series | User manual
4
5
User manual | UNO G8 Series
Series
1 | INTRODUCTION
Thank you for choosing a A.N.T Advanced Native Technologies – product!
In UNO G8 wireless system series we have put our passion and our technological
background gained over the years, to offer products that meet your needs,
maintaining the quality over time.
UNO G8 wireless system operate in UHF band with 192 channels (frequencies)
in 1785 - 1800 MHz band.
Both versions are characterized by natural sound, wide dynamic range, excellent
signal-to-noise ratio and low harmonic distortion values.
UNO G8 receivers adopt True Diversity Technology, i.e. are equipped with two
discrete antennas, A and B, which are used to select, at any moment, the best
radio signal. Both the handheld microphone and the beltpack transmitter are
equipped with an LCD showing the channel, the group and a number of functions
including battery status and MUTE.
Please, dedicate some minutes to read this instruction manual in order to quickly achieve
the best performances from this product.
For safety precautions, warranty and disposal, please refer to attached Section 2.
For further information about all A.N.T products catalog, please visit our website:
www.ant-intomusic.com
2 | DESCRIPTION
14
2 63
57
FRONT PANEL
2.1 | RECEIVER - UNO G8R
1 POWER
Press this button on receiver front panel for 1” to turn ON/OFF the unit.
2 ASC
Press this button to achieve automatic channel (frequency) synchronization
via infrared.
3 IR WINDOW
It allows the synchronization of the channel (frequency) with the transmitter.
After pressing the ASC button, place the handheld wireless microphone or
beltpack transmitter close to this window and wait for the selected channel to
stop flashing on the display. After few moments the synchronization process
ends, and the RF signal level indicator will show the presence of signal.
ATTENTION: Always apply this procedure within 10” from transmitter
powering.
4 SET
Press this button to access to setups, select functions and set receiver
parameters values. Pressed for 2” this button allows to deactivate the
automatic “lock” feature of receiver controls.
5 UP
Use this button to select values, including volume 63 steps, or upper values
of any parameter.
6 DOWN
Use this button to select values, including volume 63 steps, or lower values
of any parameter.
7 MULTI-FUNCTION DISPLAY
This LCD shows indicators of audio (AF) and radio-reception (RF) levels,
followed by the indicators of Squelch (SQL), VOLUME, GROUP, CHANNEL,
ANTENNA DIVERSITY, SYNC and the lock icon.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ANT Uno G8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ANT Uno G8 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info