Transmission technology: DECT with automatic radiation-stop-function HEALTH DECT
Frequency Range: 1880 - 1900MHz
Channels: 120
Channel Selection: Automatic
Maximum output power: <250mW
Average transmission power: <10mW
TROUBLESHOOTING
If problems occur, please read the following checklist. Check to see if the baby and/or the parent units are turned on. Check if the parent is plugged in to the power supply unit and if the batteries are in place.
THE OPERATING INDICATOR LED ON THE BABY OR PARENT UNIT IS TURNED OFF:
THERE IS NO SOUND COMING FROM THE SPEAKERS OF THE PARENT UNIT:
TRANSMISSION INTERFERENCE:
CAUSESOLUTION
The baby or parent power is off. Turn on the baby or parent unit as appropriate.
The batteries are discharged in the parent unit. Recharge or replace the batteries.
The power supply of the affected device is unplugged or not correctly connected.Check all connections.
There is no electricity available. Check that the electrical outlet delivers power.
CAUSESOLUTION
No sound is played back, the parent device is turned on and the HEALTH DECT mode is activated.
Please move for a short time the Health DECT mode slide switch to PERMANENT. A manual range check
is performed. It may be that the baby unit out of range or is turned off.
The HEALTH DECT mode (sound activation) was selected.
Make a loud noise near the baby unit to check sound transmission. Once a louder sound is heard, the
baby unit is reactivated.
The volume on the parent unit is set too low. Turn up the volume on the parent unit until you can hear your signal.
The batteries are discharged in the parent unit. Recharge or replace the batteries.
The parent unit is off. Turn the parent unit on.
CAUSESOLUTION
In rare cases, interference due to the presence of a similar transmitting device in the immediate
vicinity may occur.
Place the parents and / or baby units to a more suitable location.
This can include power lines or electronic equipment.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Ansmann Sydney at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Ansmann Sydney in the language / languages: All languages as an attachment in your email.
The manual is 4,4 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
