As long as the services support it, the
Teletext language is changeable by teletext
menu on full screen.
The supported language can be changed
without any notice.
7. Subtitle display:Press [←/→] keys to
select subtitle display model.if set "auto",it
will automatically display subtitle in has
subtitle stream,or it need press [yellow] key
and select subtitle to display.
8. You can press [EXIT] key to enter full
screen playing mode.
11.1.2. Parental Control
You can set a password for anyone who
wishes to operate in the “Installation” menu.
And you can also set the password for the
lock channels. (How to set the lock channel
please refer to LOCK) Here will show you
how to setting and how to revising the
password.
1. In “Parental Control” function,if "Parental
Lock"is ON, press [ENTER] key, there will
pop an dialogue for you to input the
password. When you input the correct
password, you will see a screen like below:
2. Parental Lock determining that when
user wish to enter menu, whether have to
input Password or not. If the setting of
“Parental Lock” is “Yes” which means user
have to key in password, set “No” means
unlock.
3. Censorship Classification Lock
determining that when user wish to lock
channels, If the setting is “view all”, play
channels not need password. If it setting
"lock all", play channels with
password.Setting 7,12,15,18,these are
determining that different stream,whether
have to input password.
4. Time control is "off",it not need
password to play channel.if it setting
"on",channels are not need input password in
allow time,or all channel are need input
password to watch.
5. New Password is used for revising
password; you can input the new password in
this item by using number keys directly. After
you filled in 4 digital numbers, the highlight
will auto skip to Confirm Password and ask
you to input the new password again. If the
password is correct, the screen will show up
a message of “Change password
successfully”.
6. You can press [EXIT] key to enter full
screen playing mode.
11.1.3. Time setting
When you enter to “Time Setting” menu, you
will see the screen like below:
1. Auto update:this item is use setting date
and time of STB.if it setting "on",the time as
