541730

Alto Professional AMX-80 Manual

8
Zoom out
Zoom in
Previous page
1/16
Next page
6
4. CONTROL ELEMENTS
SPOTLIGHT
EQUALIZATION
The MIC channel is provided with 2 bands of equalization each one providing for up to
15dB of boost and cut. There will be no signal change with the EQ control in centre
position (0).
This is a shelving filter operating on frequencies
above 12kHz. It means that all the frequencies
above this level will be boosted or cut depending
on the rotation of this control. If you want to
reduce the sibilance of human voice or reduce
Tape noise, turn the knob down. You can make
cymbals crispier or add transparency to
vocals and guitar if you turn the knob up.
It stands for Panoramic/Balance. For the
MIC channel and with the control on (0)
position the signal is sent equally to the
LeftandtotheRightsideofthemain
mix. Turn the Control all to the left and
the Signal will be sent only to the left
side of the Main Mix and vice versa. In
case of the stereo channels the BAL
control is pretty much like a balance
control in your home stereo. Turn the
control left and the right channel will be
attenuated and vice versa.
This is the master level control for the relative
channel. If the MIC TRIM is set correctly,
as well as the output level of the instruments
plugged into the line-level channels, the
LEVEL control will be positioned in between (0) and 3 o'clock. If you have to
turn the LEVEL control further up, it means that the TRIM ( and the instruments
output level ) is set too low and vice versa.
This is also a shelving filter operating on frequencies
below 80Hz.Turn the control down to reduce
unwanted hum or low frequencies resonance. Turn it
uptoaddmorepunchtoyourbassdrumsandgive
more body to a Bass Guitar.
5HIEQ
6LOWEQ
7 PAN/BAL
8 LEVEL
+15+15-15-15
HI
12kHz
0
EQ
0
80Hz
LOW
+15+15-15-15
5
6
PAN BAL
RIGHT
LEFT
RIGHT
LEFT
7
PEAK
LEVEL
-+15
8
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional AMX-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional AMX-80 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info