541730

Alto Professional AMX-80 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
4
IfyoulikeyoucanusetheEQontheMICchanneltoadjusthighandlowfrequencies.
Some tips to help you set up your mixer
1. ZERO THE CONTROLS
At this stage leave the POWER cord disconnected from the mixer.
Turn down all the GAIN, LEVEL controls.
Keep EQ and PAN/BAL controls on center position.
Turn down PHONES and MAIN MIX controls.
2TRACK TO MIX and 2TRACK TO PHONE switches should be up.
2. C0NNECTIONS
From the MAIN OUPUT socket connect your amplifier or powered speakers.
Connect a dynamic microphone to the MIC 1 input.
Connect mono or stereo line-level signals to the LINE input jacks.
Turn down all controls as suggested above.
Only at this stage connect the supplied AC Adaptor to the mixer and to the
AC Outlet. You should also plug in into the AC outlet the other components of
your Sound systems such as amplifiers, powered speakers, sound processors,
etc. Make sure that the AC outlet are properly grounded and able to deliver
enough current.
Now turn on all the power switches and leave the amplifier switch for last.
At this point turn up of a quarter the MAIN MIX giant blue knob and you are
ready to set the other levels.
3. LEVEL SETTING FOR THE MIC/LINE CHANNEL
Connect a dynamic microphone or a line-level instrument as described above.
in the microphone at normal volume or play the instrument at normal level.Sing
While singing or playing turn up the relative gain ( TRIM ) so that the PEAK LED
next to the LEVEL control starts blinking.
Now start to raise the channel LEVEL until you hear your noise comfortably.
Now you can turn up the big blue MAIN MIX control for a listening level you are
comfortable with.
4. LEVEL SETTING FOR THE STEREO LINE CHANNELS
PlayamonoorstereoinstrumentconnectedtotheLINEINjacks.
Now turn up the instrument output level control until the PEAK LED next to
The LEVEL control starts blinking.
Turn up the LEVEL control until is about equal in volume to the microphone.
Connected to Channel 1.
3. READY TO START?
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional AMX-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional AMX-80 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info