541730
7
Zoom out
Zoom in
Previous page
1/16
Next page
5
4. CONTROL ELEMENTS
SPOTLIGHT
CHANNEL INPUT
1 MIC INPUT
You can plug in any stereo or mono line-level instrument using balanced or
unbalanced plugs. You can also connect sound processors, CD Players, Tape
Players and MP3-iPOD Players to these sockets. When connecting a MONO
device, just remember to use The LEFT socket. The mono signal will anyway
appear on both left and right outputs.
2 LINE INPUT
This control adjusts the input sensitivity of the
MIC1channel. A signal applied to this input can
be adjusted for an optimal operating level. The
TRIMcontrolprovides50dBofgainwhenraised
fully.
Thanks to these little LEDs you know that the
signals applied to the mixer are adjusted properly
and that they come into the mixer without
distortion. Perform a sound-check with a microphone
or a line-level instrument such as keyboard and
adjust the TRIM control so that the LED blinks
occasionally ( In case of the line-level channels, you
must adjust the output level of the instrument
so that the LED blinks occasionally ).
A CLOSER LOOK
: Unlike other competitors AMX-80 features Peak LEDs both
on the MIC channel and on the LINE channels. Most compact mixer of this kind
in fact do not present Peak LEDs for the Line channels and it is therefore very
difficult to prevent distorted signals coming into the mixer.
3 TRIM CONTROL
4 PEAK LED
AMX-80 is equipped with one low-noise microphone
pre-amplifier with 15V phantom power and 50dB of
gain. You can connect almost any type of microphone.
Use phantom power only with condenser microphones
but please make sure the power switch is turned
off before connecting a microphone to the XLR input.
Phantom power will not damage your dynamic
microphones but it may damage tube or ribbon
microphones so make sure to read the microphone
instructions manual before using.
Never try to connect a line-level signal to the
XLR MIC input when the phantom power functions.
NOTE:
MIC 1
LINE IN 1
BAL OR
UNBAL
BAL OR
UNBAL
12
3
J.T.
J.T.
1
2
+15dB
0dB
-30dB
44dB
LINE
MIC
TRIM
3
LEVEL
-+15
8
PEA
K
4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional AMX-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional AMX-80 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info