471407

Alpine RUX-C800 Manual

33
Zoom out
Zoom in
Previous page
1/67
Next page
31-EN
01GB06PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From a PC
Customizing EUPHONY
You can customize the sense of ambience (localization and ambience)
of the cabin sound field and the balance (Level) between surround
channels and save the settings.
1
Click [Custom] for “EUPHONY.”
The EUPHONY custom screen is displayed.
2
Click [Standard], [Wide], or [Off] in the “Localization/
Ambience” to choose the localization/ambience.
Standard: Setup of the regular ambience of Ls/Rs sound.
Choose this for a subtle expansion in sound.
Wide: The ambience of Ls/Rs sound is more easily
recognizable. Use this when you want brightness
and crispness.
OFF: This disables EUPHONY.
3
Adjust the localization/ambience for each channel.
Drag [ ] for “Localization/Ambience” or click [ ]
or [ ].
Setting channel: C (Center), L (Left Front) / R (Right Front),
Ls (Left Surround) /Rs (Right Surround)
Setting contents: 0.0 to 1.0 (in 0.05 steps)
4
Click either [ ] or [ ] for “L/R Group.”
: Both R and L channels are set at the same value.
: Channels R and L can be set independently.
• When you select “ ,” a message to confirm which of the R or L
channel set up values is to be applied will be displayed. Click either
[LEFT] or [RIGHT].
5
Adjust the level for each channel. Drag [ ] for
“EUPHONY Output Level” or click [ ] or [ ].
Setting channel: C (Center), L (Left Front) / R (Right Front),
Ls (Left Surround) /Rs (Right Surround)
Setting contents: -12 to 0 dB (in 0.05 steps)
6
Click [Store] for “Custom Memory” to save the
settings.
The Memory selection screen is displayed.
7
Click either [Custom 1], [Custom 2], or [Custom 3]
and click [OK].
8
When setting is complete, click [Close Window].
• This setting is only available for 2-channel signal playback.
• If you click [Call] in Step 6, you can call and readjust the stored
setting values. Click either [Custom 1], [Custom 2], or [Custom 3] in
the setting value selection screen and click [OK].
• By clicking of “Mute” while in the adjustment mode, you can
mute the selected channel.
Pro Logic processing can be applied to the music signals recorded in 2-
channel stereo. This gives normal 2-channel stereo a more live, concert
hall effect. When you select “Music,” you can adjust the center width.
This function provides the optimum vocal localization by adjusting the
center channel localization in between the center speaker and the L/R
speakers. (Initial setting: “Music”)
1
Click [ ] for “2ch Playback Mode” and select and
click [Dolby Pro Logic II] from the pull-down menu.
2
Click either [Music] or [Movie] for “Dolby Pro Logic
II.”
Music: Suits stereo TV shows and all programs encoded in
Dolby Surround. Creates a sound field directivity
near that of discrete 5.1-channel sound.
Movie: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
• For details on Dolby Pro Logic II, see page 61.
• This function only works with 2-channel signals.
Using Dolby Pro Logic II (Dolby Pro Logic
II)
01GB00PXAH800.book Page 31 Tuesday, February 8, 2011 9:04 PM
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine RUX-C800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine RUX-C800 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info