471407
31
Zoom out
Zoom in
Previous page
1/67
Next page
29-EN
01GB06PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From a PC
7
Click either [cm] or [inch.]
cm: The unit for the time correction becomes “cm.”
inch: The unit for the time correction becomes “inch.”
8
Drag [ ] of the channel you want to adjust to the
right or left. Or click either [ ] or [ ] to set.
Setting contents: 0.00 to 20.00 ms (in 0.05 ms steps)
Channels to be set vary depending on the system set in “Setting the
Speaker System (Output System Select)” (page 13).
By clicking [ ] while in the adjustment mode, you can
mute the selected channel. Click [ ] again to output
audio.
You can listen with Defeat OFF (adjusted setup values) or with
Defeat ON (Initial value) to compare, by clicking either [ON] or
[OFF] of “Defeat” in the main menu while in the adjustment mode.
9
When setting is complete, click [Close Window].
To enable this function, Defeat should be is set to ON.
When the speaker is set to the “OFF” mode, the time correction for
that speaker cannot be set. Refer to “Setting the Speaker System
(Output System Select)” (page 13)/ “Setting the Speakers (Speaker
Setup)/Setting the Subwoofers” (page 14).
Sound may arrive at the listening position at slightly different times,
depending on the subwoofer and enclosure. After this setting, preview
the sound and adjust as necessary. A correction of 10ms (135.0 inch/
343.0 cm) may be necessary.
After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 12).
Entering numerical values
You can directly enter the distances (actual measurements) to all the
speakers to make adjustments.
1
Click [Value Input].
2
Click [cm] or [inch].
3
Enter the number directly or click [ ] or [ ] to enter
the actual measurements (distances to the
speakers).
Setting contents:
inch: 0.0 to 270.1
cm: 0.0 to 686.0
4
Click [OK].
The mode will change to the channel L/R individual
adjustment mode. The number you enter will be reflected in
the setting screen.
The time correction value.
01GB00PXAH800.book Page 29 Tuesday, February 8, 2011 9:04 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine RUX-C800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine RUX-C800 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info