Manual Alpina ATR 600 E (page 13 of 21) (All languages)

731974

Zoom out

Zoom in

1/21

PREPARING TO WORK / HOW TO START - STOP THE MOTOR

1. CHECKING THE MACHINE

WARNING! Make sure the machine is

not plugged into the mains socket.

Before starting work please:

– check that the mains frequency and voltage is

the same as the rating data on the “Identication

Plate” (see chap. 1 - 7.8).

– check that the trigger switch and the safety

button (Only for SGT 600) should move freely

without forcing and return automatically and rap-

idly back to their neutral position;

– (Only for SGT 600) check that the trigger

switch must remain locked until the safety but-

ton is pressed;

– check that the cooling air vents are not ob-

structed;

– check that the power cable and extension lead

are not damaged;

– check that handgrips and protection devices

are clean and dry, correctly mounted and well

fastened to the machine;

– check that the cutting devices and guards are

not damaged;

– check that the machine is not showing signs of

wear or damage due to knocks or other causes,

and carry out the necessary repairs.

2. ELECTRICAL CONNECTIONS

DANGER! Electricity and moisture

are not compatible.

– Always handle and connect electric cables

in dry conditions.

– Keep electric sockets or cables away from

wet and damp areas (e.g. puddles or wet

ground).

The quality of the extension leads must be no less

than H07RN-F or H07VV-F, with a minimum sec-

tion of 1.5 mm and a recommended maximum

length of 30 m.

To avoid overheating, do not keep the extension

lead rolled up during use.

DANGER! The permanent connec-

tion of any electrical equipment to the mains

of a building must be installed by a qualied

electrician in conformity with the regulations

in force. Incorrect wiring can cause serious

injury and even death.

NOTE

(Only for SGT 600 ) When you release the switch,

the safety button is also released and the motor

stops.

STOPPING THE MOTOR (Fig. 4)

To stop the motor:

– Release the switch (6).

– FIRST unplug the extension lead (3) from the

mains socket (4) and THEN disconnect the

power cable (2) of the machine from the exten-

sion lead (3).

STARTING THE MOTOR (Fig. 4)

Before starting the motor:

– Fasten the extension lead (1) to the cable clamp

on the rear handgrip.

– FIRST connect the power cable plug (2) to the

extension lead (3) and THEN plug the extension

lead into the mains socket (4).

To start the motor:

– Hold the machine rmly with both hands.

– SGT 600: Press the safety button and then the

switch (6).

SGT 350: Press the switch (6).

6. HOW TO START - STOP THE MOTOR

5. PREPARING TO WORK

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ATR 600 E in the language / languages: All languages as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina ATR 600 E Manual

Product: