Manual Alpina ATR 600 E (page 12 of 21) (All languages)

731974

Zoom out

Zoom in

1/21

WARNING! Mount the components

ve ry carefully so as not to impair the safety

and eciency of the machine. If in doubt, con-

tact your dealer.

WARNING! Make sure the machine is

not plugged into the mains socket.

WARNING! Unpacking and complet-

ing the assembly should be done on a at and

stable surface, with enough space for moving

the machine and its packaging, always mak-

ing use of suitable equipment.

Disposal of the packaging should be done in ac-

cordance with the local regulations in force.

1. JOINING THE TWO SEPARATE MACHINE

SECTIONS (Only for SGT 350)

(Fig. 1)

– Align the groove on the front section (1) with the

guide on the rear section (2) and press together

rmly until it clicks into position.

IMPORTANT

Once the two sections have

been joined, they can never be separated again.

2. MOUNTING THE FRONT HANDGRIP

(Fig. 2)

– Fit the front handgrip (1) on the support (2) so

that the seat (3) of the screw (4) is visible on the

left hand side.

– Insert the screw (4) and start to tighten the han-

dle (5).

– Before tightening the handle completely (5),

align the handgrip (1) in the most comfortable

position for the operator.

3. MOUNTING THE GUARD (Fig. 3)

WARNING! The guard must be tted

correctly to respect the safety requirements

and the correct position of the line cutting

knife.

– Hook the power unit tab (1) onto the guard seat

(2).

– Press the guard (2) upwards until you hear a

click.

IMPORTANT

Once mounted, the guard

can never be removed.

6 SAFETY WARNINGS /

MACHINE ASSEMBLY

hair can be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col-

lection can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct po-

wer tool for your application. The correct po wer tool

will do the job better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch does not

turn it on and o. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source be-

fore making any adjustments, changing accesso-

ries, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for misalignment or

obstruction of moving parts, breakage of parts

and any other condition that may aect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to become jammed and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, ta king into

account the working conditions and the work to

be performed. Using the power tool for operations

other than those intended could result in a hazardous

situation.

5) Service

a) Have your power tool serviced by a qualied

re pair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

4. MACHINE ASSEMBLY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ATR 600 E in the language / languages: All languages as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpina ATR 600 E Manual

Product: