541401
41
Zoom out
Zoom in
Previous page
1/134
Next page
Getting Started with the Graphical User Interface (GUI) 41
Software Release 2.7.1
C613-02021-00 REV F
Upgrading the GUI
You can download the latest GUI resource file from the support site at
http://www.alliedtelesyn.co.nz/support/ar400
.
Before you start, ensure that the router is running the most recent release and
patch files. The GUI is not part of the firmware release file, but the most recent
resource file will generally only be compatible with the most recent software
release. To check which files the router is running, refer to the “Current Install”
section of the command:
SHOW INSTALL
If you are updating both the release and the resource file, set the preferred
release and restart the router before installing the GUI as described below.
To upgrade the GUI
1. If required, delete the old GUI resource file
If required, you can store more than one GUI resource file on the router at a
time. If you want to delete the previous GUI resource file (for example, to
save memory), you must first disable the GUI, using the command:
DISABLE GUI
Then delete the GUI resource file, using the command:
DELETE FILE=old-gui.rsc
where:
old-gui.rsc is the name of the GUI resource file that you are replacing.
Wait until FLASH compaction has finished. This will take several minutes.
Do not interrupt the router’s power supply during FLASH compaction, under
any circumstances.
If you have multiple valid resource files and releases stored on the router, use the SET
INSTALL command to change the release and resource file the router uses (see below).
2. Load the new file onto the router
Download the GUI resource file for your model of router from the website
to your TFTP server. Do not rename the file.
Resource files use a fixed naming convention, which includes a product code, a language
code and a version code. For example, filenames for the AR450S are of the form
d450se01.rsc. If you change the GUI resource file’s name, the router will not recognise
it as a valid file and you will be unable to use it for configuration.
Load the GUI resource file from your TFTP server to the router, using the
command:
LOAD FILE=filename.rsc SERVER=server
where:
filename is the name of the GUI resource file, as shown on the support
site for your router. Do not rename the file.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info