541401
40
Zoom out
Zoom in
Previous page
1/134
Next page
40 AR400 Series Router User Guide
Software Release 2.7.1
C613-02021-00 REV F
To freeze the banner’s display so that the help does not change when you
move the mouse, press the [Ctrl] key. To unfreeze, press [Ctrl] again. Note
that element information is not available for most entries in tables. To see
descriptions of the columns of tables, click Complete Help Page.
Click Complete Help Page to see all available information, including the
element information, in a separate printable window.
Saving Configuration Entered with the GUI
Configuration changes applied using the GUI can be saved to a configuration
script by clicking the Save button at the top of the sidebar menu. A pop-up
Save window gives you the option of saving to the current configuration file,
another existing file, or a new file. You can also choose to use this configuration
at bootup.
When the Save button is red, this indicates that changes have been made to the
configuration and not yet saved. If you attempt to exit the GUI without saving
the configuration, a pop-up window will allow you to choose whether or not to
save.
Combining GUI and CLI Configuration
On some models the GUI makes it easier to configure several features by using
scenario-based wizards. For these features, the GUI requires some
configuration parameters to use particular values (for example, firewall policy
names). These features should be configured either with the GUI or the CLI,
but not both. In particular, you cannot configure these features using the CLI
and modify them using the GUI. These features are:
VPN client
Firewall
For other features and protocols, you can alternate between the GUI and the
CLI without difficulty. Note that GUI pages will not automatically refresh to
reflect changes in the CLI configuration; you must reload the relevant page (for
example, by clicking the Refresh button on your browser).
Configuring Multiple Devices
If you are configuring a number of routers with similar requirements, you may
wish to:
1. Configure one device, using either the CLI or the GUI
2. Save that configuration. This creates a configuration file, stored in the
router’s FLASH memory. The file consists of a sorted list of the CLI
commands that make up the configuration
3. Upload that file to a PC, using either the CLI or the GUI
4. Open the file in a text editor, make changes as required, and download the
file onto each router you need to configure.
Save button
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info