541350
26
Zoom out
Zoom in
Previous page
1/40
Next page
26 XONE:92 User Guide
Master Mix and Monitor System
The XONE:92 provides two stereo main mix outputs with independent level control on
balanced XLR and jack connections to drive the house PA amplifier system or additional
zone feeds. You can make a music only recording by connecting to the independent
record output. Full DJ monitoring facilities are available with independent headphones
and booth monitors, together with stereo metering system. Every music channel signal
can be checked individually or within any mix, ideal for system setup and performance
cueing. Facilities such as Mono and Split-Cue switching are well suited to the way the
professional DJ works.
1 MIX MASTERS. Two rotary master controls
adjust the output levels feeding the house PA.
These are stereo controls which adjust the left and
right signals simultaneously. They affect the stereo
mix. Note that they do not affect the record and
booth outputs. The MIX 1 maximum position
represents unity (0dB) gain. The MIX 2 maximum
position represents +10dB gain. If you find yourself
normally setting the controls in the lower part of their
travel then the connected equipment may be too
sensitive for the operating level of the console. With
the controls set to their maximum positions adjust
the input level trim of connected equipment for the
loudest level allowed.
In a club or similar installation strict sound
level and noise regulations may apply. Check
that your system levels are set up to comply.
2 MIX / MONITOR METERS. A pair of meter bars
displays the level of the selected headphones
monitor source. This is either the main LR mix, an
Aux mix or Cue. When SPLIT CUE is selected the
left meter displays the active CUE signal, the right
displays PRG (program), both in mono.
Each meter has 9 leds to indicate signal levels from
a low –20dB. Green and blue leds indicate normal
operating levels. The top red led lights at +10dB
still providing a healthy 12dB before clipping. Meter
‘0’ represents +4dBu at the MIX 1 XLR outputs and
-2dBu at the MIX 2 LINE outputs. The meters are
peak responding with a fast attack and are therefore
able to display fast transients accurately.
3 CUE ACTIVE indicator. A large red led lights
when a channel CUE is active. This indicates that
the selected channel CUE signal is heard in the
headphones and displayed on the monitor meters.
It is important to use CUE to set the channel levels
correctly to maintain the wide dynamic range
achievable with this console. Reduce the gain if the
red +10 leds flash.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info