541350
24
Zoom out
Zoom in
Previous page
1/40
Next page
24 XONE:92 User Guide
8 RESONANCE control. Adjust this to change
the ‘Q’ or ‘sharpness’ of the filters. This affects how
they respond around the cut-off frequency. At the
minimum MILD setting the filters have a gentle roll-
off ‘knee’ giving a subtle, smooth response. At the
clockwise WILD setting they produce a resonant
feedback boost around cut-off resulting in some
very dramatic performance effects. The sound
varies according to the filter type selected. To avoid
unexpected results it is best to start experimenting
with RESONANCE set to a low position. Set the
control to the “two o’clock” position for the flattest
frequency response
High RESONANCE settings can result in
significant boost of selected frequencies.
Reduce the channel GAIN if the signal levels
increase enough to light the red PK leds in the
output meters. Failure to do this may result in
system overload and distortion.
9 VCF TO XFADER control. Press this switch to
assign either filter to the crossfader. The crossfader
can then be used instead of the FREQ VCF sweep
control to create filter effects whilst crossfading.
10 VCF LINK 2-1. Press this switch to link
FILTER 2 VCF to FILTER 1VCF. FILTER 2 FREQ
can now be controlled by the FREQ VCF sweep
control of FILTER 1. This can be used to
synchronise the cut-off point of both filters. For
instance, assign Channel 1 to Filter 1 and Channel
2 to Filter 2. Select a low pass filter on filter 1 and
a high pass on filter 2. With both filters ON and the
link switch selected, the low frequencies of channel
1 will be accurately joined to the high frequencies of
channel 2. This can be used to produce to
incredibly smooth mixes or to mix tracks that would
otherwise clash when mixed conventionally.
LFO modulation
The XONE:92 VCF filters are further enhanced by
two independent LFOs. The LFOs can be applied
to either VCF for additional cyclic filter modulation
effects.
11 LFO ON switch. Each LFO has its own ON
switch. The red led lights when the LFO is switched
on. The filter is not affected by the LFO if the switch
is in its off position. Use this to punch the LFO
effect in or out.
12 LFO DEPTH control. Rotate control knob
clockwise to increase the depth (amount) of the LFO
modulation applied to the VCF.
13 TAP tempo control. ‘Tapping’ the button
sets the speed of the LFO in time with the last two
button presses. Once set, the light-pipe flashes red
in time with the LFO.
14 X2 tempo switch. Press this switch to double
the LFO speed; determined by setting the TAP
tempo 13 .
LO
0dB
RESONANCE
LO (MILD)
HI (WILD)
MID
FREQUENCY HI
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info