541350
22
Zoom out
Zoom in
Previous page
1/40
Next page
22 XONE:92 User Guide
Crossfader and VCF
The crossfader is applied to the stereo music channels and lets you smoothly fade from one track into another
using a single fader. It is also used as a creative performance tool to layer or interact between two sounds when
cut or scratch mixing . It is fully assignable from each music channel and can be easily replaced if it becomes
damaged or worn through exceptional mechanical operation. The high quality Penny & Giles type is used.
The XONE:92 includes an enhanced version of the acclaimed analogue voltage controlled filter (VCF) section first
introduced on the XONE:62. These filters provide live performance tools far more powerful than any equaliser or
kill switch. They produce the same warm analogue resonant frequency sweeping sound as made popular by well
known classic analogue synthesisers, but using the latest high performance technology for quiet, stable operation.
1 VCA Crossfader. The XONE:92 uses eight
high performance voltage controlled amplifiers
(VCA), a pair for each music channel. The robust
45mm fader produces a DC control voltage which
determines the signal level of the VCAs. The
voltage is filtered to prevent any audible noise,
clicks or scratchiness resulting should the fader
track become worn. This benefit would not be
possible if the signal were routed through a
conventional audio fader.
2 Crossfader assignment indicators. Four
green leds above the crossfader help you visually
check which channels are routed to the crossfader.
3 Crossfader Curve. XONE:92 allows the
response of the crossfader to be altered to match all
mixing styles. Turning the crossfade curve control
fully anticlockwise gives a progressive curve with a
dip (4dB) in the centre position. Rotating the control
clockwise gradually reduces the centre dip and
sharpens the attack. Fully clockwise the response
is almost instantaneous and full signal level is
reached as soon as the crossfader knob is moved
from its end stop.
4 XFADE select switch. In the central position
the music signal level is unaffected by the
crossfader. Toggle to route the VCA control signal
through the crossfader. To route to the left (X) side
make sure the switch is in its left position. Switch to
the right position to route to the right (Y) side. The
relevant channel crossfader assignment indicator 2
will light.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info