541350

Allen-Heath Xone 92 Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
28 XONE:92 User Guide
MIDI Control of External Devices
MIDI is short for Musical Instrument Digital Interface conceived in the 1980’s so that
keyboards and other electronic instruments could have a common interface allowing
them to communicate with each another. Applications now include sound and lighting
consoles, computer sequencing, show control and performance effects control. The
XONE:92 is unique in being the first DJ mixer to include MIDI functionality. Equipped
with a MIDI out socket, XONE:92 allows the DJ to control other external MIDI devices
from featured front panel controls. This adds to the unique combination of creative tools
available to the DJ.
XONE:92 can be used to remotely control effects units, sequencers, drum machines etc
via MIDI providing the unit you wish to control is compatible with the MIDI controller
codes generated. Most computer sequencing programs allows you to map different
controller codes to virtually any function within the software, so providing the greatest
flexibility of control. Refer to the user guide of the device or program you wish to use to
check for compatibility. The default MIDI channel used is 16, but this can be changed
internally to 15 if required.
Basic Setup
Connect MIDI OUT from the XONE:92 to the MIDI IN of the device you wish to control.
Use a standard 5-pin MIDI lead. Set the device MIDI channel number to 16 (or 15 if the
XONE:92 has been changed internally). Refer to the device user guide for further details.
If you want to use the XONE:92 as a master clock, for instance with a drum machine or
sequencer, you need to set the device to receive External MIDI clocks. Once again you
need to refer to the relevant user guide.
For more detailed descriptions of how to set up specific software/effects units etc please
log on to our web site at
www.xone.co.uk These descriptions will be updated from
time to time as more applications and compatible devices are included.
XONE:92 as a Master Tempo Controller
Using the XONE:92 to sync an external sequencer or drum machine to a pre-recorded
source takes practice, but once learned can be achieved quite quickly, and is a great
way to add your own loops, patterns and so on to your favourite tracks.
Once you have got the device to respond to the XONE:92 master MIDI clock and
stop/start button, use the following method:
Set the Tempo/Data control 1 to its center (detented) position, with the Stop/Start
button 2 OFF. Tap in the tempo of the track you want to sync to, using the VCF 2 LFO
Tap Tempo button 3 Accuracy here is very important, try to tap in the beat as
precisely as possible; you will find that you get more adept the more you practice. Once
you have a near approximation of the tempo, hit the Start button to set off the sequencer
on the first beat of a bar.
Depending on how accurately you have tapped in the beat the sequence should play in
sync for a short while, but will probably drift after a few seconds. If the tempo is too fast,
turn the Tempo/Data control anti-clockwise to slow down the MIDI clock, if it is too slow,
turn it clockwise to speed it up. After each adjustment restart the sequencer until the
clock speed has been set to match the beat and maintain synchronisation. The
Tempo/Data control has finer effect on clock speed in and around its center position, and
greater effect as it is rotated towards either end. For this reason the more accurate tap
tempo you start with the easier it will be to fine tune to stay in sync.
Remember to always return the Tempo/Data control to the center position before tapping
in a new BPM.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info