541352
48
Zoom out
Zoom in
Previous page
1/52
Next page
Qu-16 User Guide 48 AP9031 iss.3
11.2 System Hard Reset
A power up reset is available if you need to fully reset
the Qu mixer settings and memories. This could be
done to clear the system out before sending the mixer
to a client, or if you suspect a system problem.
To reset mix parameters before starting a show or
sound check, use a Scene or the Reset Mix Setting
function described earlier in this guide.
Note – A hard reset clears all current settings, all
Scenes and all User Libraries.
First turn off the system including amplifiers and
powered speakers.
To hard reset the Qu mixer - Press and hold the
touch screen Reset and Setup keys together and then
power up the mixer. Keep the keys pressed for at least
3 seconds while the mixer boots. Release the keys.
The hard reset:
Resets the current settings as described for the
Reset Mix Settings button,
Resets non-scene parameters and user
preferences to a factory default,
Clears scene recall Safes,
Clears all memories including Scenes and User
Libraries
Resets the Network IP address and the touch
screen calibration
System hard reset:
Source Preamp, Gain 28dB, 48V off
ST1-3 trim 0dB
HPF out, 100Hz
PEQ and GEQ in, flat
Gates out, thres -36dB, depth 20dB
Comp out, thres 0dB, ratio 3.2:1
Delays 0ms
Mix source post-EQ
Sends to Mixes -Inf and pre-fade
Sends to FX -Inf and post-fade
Direct Out post-fade/mute, trim 0dB
Mutes off
Channel faders -Inf
FX return faders 0dB
FX send and Mix master faders -4dB
LR master fader -Inf
FX1 = Mix>Return, Reverb (EMT250)
FX2 = Mix>Return, Delay (Vocal)
FX 3 and 4 = unassigned
Mute Groups unassigned
AES, Alt Out patch LR post-fade
Qu-Drive stereo patch LR post-fade
USB patch CH1-16, ST1-3, LR
Talkback unassigned, HPF 120Hz
Custom Strip unassigned
SoftKeys = Mute Groups 1-4
Input PAFL = PFL, mix = AFL
PAFL additive mode off
Sel follow PAFL on, LR to PAFL on
PAFL trim 0dB, delay 0ms
Talkback mic gain 27dB
Sig Gen Pink Noise, unassigned
Clears all scene Safes
Clears all Scene memories
Clears all User Libraries
Resets Network address to DHCP
Resets touch screen calibration
Hold for 3 seconds
while powering up
the mixer
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath QU-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath QU-16 in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info