541352
46
Zoom out
Zoom in
Previous page
1/52
Next page
Qu-16 User Guide 46 AP9031 iss.3
10. Qu-Pad iPad app
Qu-Pad is an engineer's mixing tool providing wireless mobile control for the Qu-16 mixer. It gives you the
freedom to walk the room or stage and control the sound right where it is needed. Qu-Pad is intended for
live mixing control, not for system setup or memory access. Qu-Pad and the Qu console can work
together to provide simultaneous control of independent functions, for example one engineer using the
console to mix front-of-house sound, and another using the iPad to mix monitors on stage.
Note - This version of Qu-Pad supports only one iPad connection at a time.
Live mixing functions available:
Fader levels, mutes, pan
Aux and FX sends, routing and Pre/Post switching
Input Preamp/USB selection
Preamp Gain, Pad, Polarity and 48V
HPF, Gate, PEQ, GEQ, Comp, Delays
FX Tap Tempo
Mute Groups
RTA function
PAFL select
Full signal metering
Custom strips for personalised channel layout
Custom channel naming (stored on the iPad)
Requirements:
Qu-Pad app downloaded from the Apple Store.
Qu mixer running firmware V1.20 or higher.
Suitable wireless router (wireless access point).
Cat5 cable to connect to the Qu Network port.
iPad running iOS5.1.1 or higher. Current version
tested at time of publication is iOS7.0.
Note –The Qu-Pad app and the Qu mixer firmware
must have the same feature release number (1.N), but
can have a different maintenance number (x) where:
Firmware version = V1.Nx
Wireless router - For information on choosing and
setting up a wireless router, refer to the Help Manual
built into the Qu-Pad app and to the manufacturer’s
setup guide that comes with the router.
Qu mixer Network settings – The Qu mixer and
wireless router must have compatible TCP/IP
addresses. We recommend setting the mixer to DHCP
for the typical application where the Network port
connects to the router only. This means the mixer will
be given an IP address automatically by the router. Go
to the Setup / Network screen to check this setting.
Channel naming – Input channels, mixes, FX and
mute groups can be named with up to 5 characters.
These names are stored along with the Custom Layer
settings on the iPad. They do not appear on the Qu
mixer and are not part of the Scene or Show
memories.
Using Qu-Pad – Refer to the Help Manual built into the
Qu-Pad app for instructions on how to set up and
operate Qu-Pad.
Further information is available in the Knowledgebase
and Digital Community on the Allen & Heath web site.
CH PEQ shown
Custom Layer setup
LR mix selected, CH preamp shown
FX mix selected
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath QU-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath QU-16 in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info